This splits setting the power mode of the controller / phy in two
functions. It's done in preparation of setting up the phy based on the
pixelclock.

No functional changes intended.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-23-knaerzche@gmail.com

inno_hdmi_reset is only ever called when initializing the controller. At
this point it’s completely uneccessary to power up the PHY, since all
what has to work at this point is the DDC bus. The phy will be powered up
correctly when a mode is set in inno_hdmi_encoder_enable and disabled in
inno_hdmi_encoder_disable.
Set it to LOWER_PWR after resetting the controller.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-22-knaerzche@gmail.com

The display controller will always give full range RGB regardless of the
mode set, but HDMI requires certain modes to be transmitted in limited
range RGB. This is especially required for HDMI sinks which do not support
non-standard quantization ranges.

This enables color space conversion for those modes and sets the
quantization range accordingly in the AVI infoframe.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-21-knaerzche@gmail.com

The data which is currently hold in hdmi_data should not be part of device
itself but of the connector state.
Introduce a connector state subclass and move the data from hdmi_data in
there.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-20-knaerzche@gmail.com

The inclusion syscon.h isn't used anywhere. Remove it.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-19-knaerzche@gmail.com

The struct member irq isn't used anywhere. Drop it.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-18-knaerzche@gmail.com

The drm_dev field in the inno_hdmi struct stores a pointer to the DRM
device but is never used anywhere in the driver. Let's remove it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-17-knaerzche@gmail.com

The inno_hdmi driver relies on its own internal infoframe type matching
the hardware.

This works fine, but in order to make further reworks easier, let's
switch to the HDMI spec definition of those types.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-16-knaerzche@gmail.com

The code to upload infoframes to the controller uses a weird construct
which, based on the previous function call return code, will either
disable or enable that infoframe.

In order to get rid of that argument, let's split the function to
disable the infoframe into a separate function and make it obvious what
we are doing in the error path.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-15-knaerzche@gmail.com

The HDMI vendor infoframe is only meant to be sent with 4k60 modes and
higher, but the controller doesn't support them. Let's drop them from
the kernel.

Suggested-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-14-knaerzche@gmail.com

The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.

We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-13-knaerzche@gmail.com

Now that the unneeded support for YUV based input formats is gone, the csc
coefficients for those formats can be dropped as well.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-12-knaerzche@gmail.com

The driver has a lot of logic to deal with multiple input formats, but
hardcodes it to RGB. This means that most of that code has been dead
code, so let's get rid of it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-11-knaerzche@gmail.com

The sink_has_audio flag is not used anywhere in the driver so let's get
rid of it. It's redundant with drm_display_info.has_audio anyway.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-10-knaerzche@gmail.com

The mode's VIC is only ever used in the inno_hdmi_setup() function so
there's no need to store it in the main structure.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-9-knaerzche@gmail.com

We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-8-knaerzche@gmail.com

The inno_hdmi encoder still uses the !atomic variants of enable, disable
and modeset. Convert to their atomic equivalents.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-7-knaerzche@gmail.com

The driver maintains a copy of the adjusted mode but doesn't use it
anywhere. Remove it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-6-knaerzche@gmail.com

The mode_fixup implementation doesn't do anything, so we can simply
remove it.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-5-knaerzche@gmail.com

The controller wants the difference between *total and *sync_start in the
HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for
certain non-VIC modes. See downstream commit [0].

[0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c



Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Co-developed-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-4-knaerzche@gmail.com

In contrast to RK3036, RK312x SoCs have multiple output channels such as
RGB (i.e. LVDS TTL), LVDS, DSI and HDMI.

In order to support that, this splits output from RK3036 and defines an
separate one for RK3126 with the registers required to enable the
appropriate output and setup the correct polarity.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-3-knaerzche@gmail.com

tilcdc currently just ioremaps its iomem, without doing the (a bit more
robust) request on the memory first. The devm_ functions provide a handy
way to both request and ioremap the memory with automatic cleanup.

Replace the manual ioremap with the devm_ version.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222115216.19218-2-pstanner@redhat.com

List EDT ETML0700Z9NDHA in the LVDS panel enumeration.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231221124339.420119-2-raphael.gallais-pou@foss.st.com


Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221124339.420119-2-raphael.gallais-pou@foss.st.com

In probe() we create the drm_device, and then register the MHI controller.
In remove(), we should unregister the controller first, then remove the
drm_device.  Update the remove() operations to match.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-8-quic_jhugo@quicinc.com

Offload the balancing of init and destroy calls to DRM managed APIs.
mutex destroy for ->cntl_mutex is not called during device release and
destroy workqueue is not called in error path of create_qdev(). So, use
DRM managed APIs to manage the release of resources and avoid such
problems.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-7-quic_jhugo@quicinc.com

Add support for the following 3 panels:
1. BOE NV116WHM-N49 V8.0
2. BOE NV122WUM-N41
3. CSO MNC207QS1-1

Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218095933.2487360-1-xuxinxiong@huaqin.corp-partner.google.com

These panels are used by Mediatek MT8173 Chromebooks, and they used to
work with the downstream v4.19 kernel without any specified delay.
Back in the v4.19 kernel, they used the "little white lie" approach,
which is making the devicetree claim a specific panel's compatible
string for many different panels. That was a common solution before the
generic edp-panel driver.

After we uprevved the device to a newer kernel and used the edp-panel
driver, we saw multiple devices reporting warnings of using an unknown
panel and falling back to the conservative timings, which means that
they turn on/off much more slowly than they should. We tried to fill in
the timings for those panels, but we failed to find all the data sheets
for them.

Therefore, instead of having them use the default conservative timings,
update them with less-conservative timings from other panels of the same
vendor. The panels should still work under those timings, and we can
save some delays and suppress the warnings.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-4-treapking@chromium.org

Add panels used by Mediatek MT8173 Chromebooks.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-3-treapking@chromium.org

Add the support of powered_on_to_enable delay as the minimum time that
needs to have passed between the panel powered on and enable may begin.

This delay is seen in BOE panels as the minimum delay of T3+T4+T5+T6+T8
in the eDP timing diagrams.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-2-treapking@chromium.org

The original rationale for
commit cd456f8d ("drm: Restrict stackdepot usage to builtin drm.ko")
was that depot_save_stack() (which is what we used back then)
wasn't exported. stack_depot_save() (which is what we use now) is
exported however, so relax the dependency allow CONFIG_DRM_MM_DEBUG
with DRM=m.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215111129.9559-1-ville.syrjala@linux.intel.com


Acked-by: Javier Martinez Canillas <javierm@redhat.com>

The name of the structure drm_atomic_state is confusing. Let's add an
entry to our todo list to rename it.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-5-mripard@kernel.org


Signed-off-by: Maxime Ripard <mripard@kernel.org>

The current documentation of drm_atomic_state says that it's the "global
state object". This is confusing since, while it does contain all the
objects affected by an update and their respective states, if an object
isn't affected by this update it won't be part of it.

Thus, it's not truly a "global state", unlike object state structures
that do contain the entire state of a given object.

Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://lore.kernel.org/r/20231214100917.277842-4-mripard@kernel.org


Signed-off-by: Maxime Ripard <mripard@kernel.org>

Commits 63e83c1d ("drm: Consolidate connector arrays in
drm_atomic_state"), b8b5342b ("drm: Consolidate plane arrays in
drm_atomic_state") and 5d943aa6 ("drm: Consolidate crtc arrays in
drm_atomic_state") moved the object pointer and their state pointer to
an intermediate structure storing both.

The CRTC commit didn't update the doc of the crtcs field to reflect
that, and the doc for the planes and connectors fields mention that they
are pointers to an array of structures with per-$OBJECT data.

The private_objs field was added later on by commit b430c27a ("drm:
Add driver-private objects to atomic state") reusing the same sentence
than the crtcs field, probably due to copy and paste.

While these fields are indeed pointers to an array, each item of that
array contain a pointer to the object structure affected by the update,
and its old and new state. There's no per-object data there, and there's
more than just a pointer to the objects.

Let's rephrase those fields a bit to better match the current situation.

Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-3-mripard@kernel.org


Signed-off-by: Maxime Ripard <mripard@kernel.org>

Commit 63e83c1d ("drm: Consolidate connector arrays in
drm_atomic_state") removed the connector_states field but didn't remove
its mention in the num_connectors documentation.

Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-2-mripard@kernel.org


Signed-off-by: Maxime Ripard <mripard@kernel.org>

Some fields of drm_atomic_state have been documented in-line, but some
were documented in the main kerneldoc block before the structure.

Since the former is the preferred option in DRM, let's move all the
fields to an inline documentation.

Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20231214100917.277842-1-mripard@kernel.org


Signed-off-by: Maxime Ripard <mripard@kernel.org>

Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that vesafb can modify it at
will.

v2:
	* comment on devm_kmemdup() usage (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-5-tzimmermann@suse.de

Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-4-tzimmermann@suse.de

Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that efifb can modify it at
will.

v2:
	* comment on devm_kmemdup() usage (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-3-tzimmermann@suse.de

Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.

v3:
	* use const screen_info in several places (Sui)
	* fix build for deferred takeover (kernel test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-2-tzimmermann@suse.de

Every time QAIC_MMAP_BO ioctl is called for a BO,
drm_gem_create_mmap_offset() is called. Calling
drm_gem_create_mmap_offset() more then once for a BO seems redundant.

Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-6-quic_jhugo@quicinc.com