adelie-live-mate-ppc-1.0-beta5-20230829: Booting stalls infinitely on my G4 3,6 DP
I gave adelie-live-mate-ppc-1.0-beta5-20230829 a test ride on my PowerMac G4 3,6 DP. The Adelie kernel gets loaded and the machine starts to boot but always gets stuck at detecting my PCI SATA SiI 3112 card. (see screenshot).
Don't think it's a general kernel issue as the SiI 3112 works fine on Gentoo Linux on the same machine.
# uname -a
Linux T600 6.4.13-gentoo-PMacG4 #1 SMP Thu Aug 31 15:24:16 CEST 2023 ppc 7455, altivec supported PowerMac3,6 GNU/Linux
# lspci
0000:00:0b.0 Host bridge: Apple Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV350 [Radeon 9550/9600/X1050 Series]
0001:00:0b.0 Host bridge: Apple Inc. UniNorth 2 PCI
0001:00:12.0 USB controller: NEC Corporation OHCI USB Controller (rev 43)
0001:00:12.1 USB controller: NEC Corporation OHCI USB Controller (rev 43)
0001:00:12.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04)
0001:00:13.0 Mass storage controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0001:00:15.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller
0001:00:15.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller
0001:00:15.2 Parallel controller: Illegal Vendor ID Device 9865
0001:00:16.0 Network controller: Broadcom Inc. and subsidiaries BCM4306 802.11b/g Wireless LAN Controller (rev 02)
0001:00:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo Mac I/O (rev 03)
0001:00:18.0 USB controller: Apple Inc. KeyLargo USB
0001:00:19.0 USB controller: Apple Inc. KeyLargo USB
0001:00:1b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43)
0001:00:1b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43)
0001:00:1b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04)
0002:00:0b.0 Host bridge: Apple Inc. UniNorth 2 Internal PCI
0002:00:0d.0 Unassigned class [ff00]: Apple Inc. UniNorth 2 ATA/100
0002:00:0e.0 FireWire (IEEE 1394): Apple Inc. UniNorth 2 FireWire (rev 01)
0002:00:0f.0 Ethernet controller: Apple Inc. UniNorth 2 GMAC (Sun GEM)
# lspci -vv -s 0001:00:13.0
0001:00:13.0 Mass storage controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATALink Controller
Device tree node: /sys/firmware/devicetree/base/pci@f2000000/pci1095,3112@13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at 0460 [size=8]
Region 1: I/O ports at 0450 [size=4]
Region 2: I/O ports at 0440 [size=8]
Region 3: I/O ports at 0430 [size=4]
Region 4: I/O ports at 0420 [size=16]
Region 5: Memory at 80082000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at 80100000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sata_sil
Posting the issue here in Image Creation as I did not find a specific tracker for install media. Hope that's ok.