st7789v_spi_write initializes a message with just
a single transfer, spi_sync_transfer can be used
for that.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-7-sre@kernel.org

The reset pin might not be software controllable from the SoC,
so make it optional.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-6-sre@kernel.org

ST7789V_COLMOD_RGB_FMT_18BITS and ST7789V_COLMOD_CTRL_FMT_18BITS
are unused in favour of MIPI_DCS_PIXEL_FMT_18BIT, remove them.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-5-sre@kernel.org

SPI device drivers should also have a SPI ID table.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-4-sre@kernel.org

The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.

Fixes: 7ee933a1 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de

This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
display using MIPI DSI interface.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711-startek_display-v4-2-fb1d53bfdef6@baylibre.com

Add support for TDO TL050HDV35-H1311A LCD panel.

Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719102616.2259-3-matuszpd@gmail.com

Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm
code from complaining about unexpected bpc value (0).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727172445.1548834-1-dmitry.baryshkov@linaro.org

The newly added driver only builds when DRM_DISPLAY_DP_HELPER is enabled:

x86_64-linux-ld: drivers/gpu/drm/panel/panel-visionox-r66451.o: in function `visionox_r66451_enable':
panel-visionox-r66451.c:(.text+0x105): undefined reference to `drm_dsc_pps_payload_pack'

Select both CONFIG_DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to
ensure the helper function is always available.

Fixes: a6dfab27 ("drm/panel: Add driver for Visionox r66451 panel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719130940.659837-1-arnd@kernel.org

Both the patform_driver and mipi_dsi_driver structures contain pointers
to the match table used, so the custom code to obtain match and match
data can be replaced by calls to of_device_get_match_data().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64ded5b7e809e4c6e915b2c4d8b82e02319cd206.1690535800.git.geert+renesas@glider.be

The driver now uses the backlight interface, which breaks when that
is disabled:

ld.lld: error: undefined symbol: devm_backlight_device_register

Enforce the necessary Kconfig dependency to avoid this.

Fixes: c2268daa ("drm/panel: ld9040: Register a backlight device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724121736.1293270-1-arnd@kernel.org

These variables are never referenced in the code.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719105829.148011-1-luca.ceresoli@bootlin.com

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org

This has been superseded by RPM in commit
3235b0f2 ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare")
and the last user of the non-RPM case has been dropped in commit
b6d5ffce ("drm/panel-simple: Non-eDP panels don't need "HPD" handling")
whatever is left in this driver is just assigned and never used.
Drop the remaining parts.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709162253.464299-1-marex@denx.de

Register a backlight device to be able to switch between all the gamma
levels.

v2: Remove .get_brightness() callback, use bl_get_data() and
    backlight_get_brightness()

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230708084027.18352-3-paul@crapouillou.net

I have no idea what the prior magic values mean, and I have no idea
what my replacement (extracted from [1]) magic values mean.

What I do know, is that these new values result in a much better
picture, where the blacks are really black (as you would expect on an
AMOLED display) instead of grey-ish.

[1]: https://github.com/dorimanx/Dorimanx-SG2-I9100-Kernel/blob/master-jelly-bean/arch/arm/mach-exynos/u1-panel.h



v2: Remove spurious new line

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230708084027.18352-2-paul@crapouillou.net

Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC
flags. Those are used by various bridges in the pipeline to correctly
configure its sync signals polarity.

Fixes: d69de69f ("drm/panel: simple: Add Powertip PH800480T013 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201602.565948-1-marex@denx.de

Because the setting of hporch is too small, there will be warning in
kernel log[1]. After fine tune the HFP and HBP, this warning can be
solved. The actual measurement frame rate is 60.1Hz.

[1]: WARNING kernel:[drm] HFP + HBP less than d-phy, FPS will under 60Hz

Fixes: 8716a647 ("drm/panel: Support for Starry-ili9882t TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627050148.2045691-1-yangcong5@huaqin.corp-partner.google.com

The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type'
information to avoid the following warning:

panel-simple panel: Specify missing connector_type

Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 41bcceb4 ("drm/panel: simple: Add support for Innolux AT043TN24")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the drm panel drivers from always returning zero in the
remove callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-36-u.kleine-koenig@pengutronix.de

Add support for the 1080x2340 Visionox R66451 AMOLED DSI panel that
comes with the Qualcomm HDK8350 display expansion pack.

The panel enables display compression (DSC v1.2) by default.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516-b4-r66451-panel-driver-v2-2-9c8d5eeef579@quicinc.com

Remove unneeded variable and directly return 0.

Signed-off-by: Wang Jianzheng <wangjianzheng@vivo.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Artur Weber <aweber.kernel@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608033446.18412-1-wangjianzheng@vivo.com

Add a panel entry for the AUO B116XAB01.4 edp panel, found in the Acer
Chromebook Spin 311 (CP311-3H) laptop.

Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607150615.241542-1-laura.nao@collabora.com

Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/


Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607063139.621351-6-dario.binacchi@amarulasolutions.com

The Starry-ili9882 is a 10.51" WUXGA TFT panel. which fits in nicely with
the existing panel-boe-tv101wum-nl6 driver. From the datasheet,MIPI need
to keep the LP11 state before the lcm_reset pin is pulled high. So add
lp11_before_reset flag.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-5-yangcong5@huaqin.corp-partner.google.com

The Starry-himax83102-j02 is a 10.51" WUXGA TFT panel. which fits in nicely
with the existing panel-boe-tv101wum-nl6 driver. From the datasheet[1], MIPI
needs to keep the LP11 state before the lcm_reset pin is pulled high, so
increase lp11_before_reset flag.

[1]: https://github.com/HimaxSoftware/Doc/tree/main/Himax_Chipset_Power_Sequence



Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: removed some spacing on one line]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-3-yangcong5@huaqin.corp-partner.google.com

This updates the panel timings to achieve a clean 60Hz refresh rate.

Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-13-56eb7a4d5b8e@linaro.org

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code.  However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

panel_edp_remove() always returned zero, so convert it to return void
without any loss and then just drop the return from
panel_edp_platform_remove().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530074216.2195962-1-u.kleine-koenig@pengutronix.de

After commit b8a1a4cd ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526090709.1517297-1-u.kleine-koenig@pengutronix.de

The previous setting was related to the overall dimension and not to the
active display area.
In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the
following parameters:

 ----------------------------------------------------------
|       Item        |         Specifications        | unit |
 ----------------------------------------------------------
| Display area      | 98.7 (W) x 57.5 (H)           |  mm  |
 ----------------------------------------------------------
| Overall dimension | 105.5(W) x 67.2(H) x 4.96(D)  |  mm  |
 ----------------------------------------------------------

Fixes: 966fea78 ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: fixed Fixes commit id length]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com

Add support for the Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/244d9471e0ed248ff2dea8ded3a5384a1c51904b.1684931026.git.geert+renesas@glider.be

Fixes compilation issues with older GCC versions and Clang after
changes introduced in commit 6810bb39 ("drm/panel: Add Samsung
S6D7AA0 panel controller driver"). Tested with GCC 13.1.1, GCC 6.4.0
and Clang 16.0.3.

Fixes the following errors with Clang:

  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not a compile-time constant
          .drm_mode = s6d7aa0_lsl080al02_mode,
                      ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not a compile-time constant
          .drm_mode = s6d7aa0_lsl080al03_mode,
                      ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not a compile-time constant
          .drm_mode = s6d7aa0_ltl101at01_mode,
                      ^~~~~~~~~~~~~~~~~~~~~~~
  3 errors generated.

Fixes the following errors with GCC:

  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not constant
    .drm_mode = s6d7aa0_lsl080al02_mode,
                ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: note: (near initialization for 's6d7aa0_lsl080al02_desc.drm_mode')
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not constant
    .drm_mode = s6d7aa0_lsl080al03_mode,
                ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: note: (near initialization for 's6d7aa0_lsl080al03_desc.drm_mode')
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not constant
    .drm_mode = s6d7aa0_ltl101at01_mode,
                ^~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: note: (near initialization for 's6d7aa0_ltl101at01_desc.drm_mode')

Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/20230523180212.GA1401867@dev-arch.thelio-3990X


Reported-by: kernelci.org bot <bot@kernelci.org>
Link: https://lore.kernel.org/llvm/646c6def.a70a0220.58c1a.903d@mx.google.com


Fixes: 6810bb39 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524084324.11840-1-aweber.kernel@gmail.com

Initial driver for S6D7AA0-controlled panels. Currently, the following
panels are supported:

 - S6D7AA0-LSL080AL02 (Samsung Galaxy Tab 3 8.0)
 - S6D7AA0-LSL080AL03 (Samsung Galaxy Tab A 8.0 2015)
 - S6D7AA0-LTL101AT01 (Samsung Galaxy Tab A 9.7 2015)

It should be possible to extend this driver to work with other panels
using this IC.

Tested-by: Nikita Travkin <nikita@trvn.ru> #ltl101at01
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-3-aweber.kernel@gmail.com

There is a problem of screen shake on the old panel. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code mainly
modifles the following.

a)adjusted for GOP timing. When Display sleep in, raise all GOP signals
to VGHO and then drop to GND.
b)Increased the Vertical back Porch and Vertical pulse width, so need to
update vsync_end and vtotal and CLK in drm_display_mode.

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: fixed spelling mistake in subject]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230509025153.1321446-1-yangcong5@huaqin.corp-partner.google.com

For "boe,tv105wum-nw0" this special panel, it is stipulated in
the panel spec that MIPI needs to keep the LP11 state before
the lcm_reset pin is pulled high.

Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-3-shuijing.li@mediatek.com

Reduce the delay after LCM reset by removing an extra delay in the
initialization commands array. The required delay of at least 6ms after
reset is guaranteed by boe_panel_prepare().

Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-2-shuijing.li@mediatek.com

Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel support.
The panel has a LVDS display interface.

The panel's product specification can be found at:
http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdf



Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508083826.1016206-3-victor.liu@nxp.com

Drop sharp_nt_panel_disable() and sharp_nt_panel_enable(), which bear no
useful code. Also drop sharp_nt_panel::enable and sharp_nt_panel::mode
fields which also provide no use now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-2-dmitry.baryshkov@linaro.org

Using current settings causes panel flickering on APQ8074 dragonboard.
Adjust panel settings to follow the vendor-provided mode. This also
enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the
vendor dtsi for the mentioned dragonboard.

Fixes: ee017238 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-1-dmitry.baryshkov@linaro.org

The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the
Anbernic RG353V handheld gaming device. Add support for it.

Unfortunately it appears this controller is not able to support 120hz
or 100hz mode like the first revision panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426143213.4178586-4-macroalpha82@gmail.com