Add support for the Anbernic 351V. Just like the 353 series the
underlying vendor is unknown/unmarked (at least not visible in a
non-destructive manner). The panel had slightly different init
sequences and timings in the BSP kernel, but works fine with the
same ones used in the existing driver. The panel will not work without
the inclusion of the MIPI_DSI_CLOCK_NON_CONTINUOUS flag, and this flag
prevents the 353 series from working correctly, so a new compatible
string is added.

Tested colors and timings using modetest and all seem to work identical
to the 353 otherwise.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231003163355.143704-3-macroalpha82@gmail.com


Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231003163355.143704-3-macroalpha82@gmail.com

Add support for the 2700x1224 AMOLED BOE panel bundled with a RM692E5
driver IC, as found on the Fairphone 5 smartphone.

Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927-topic-fp5_disp-v2-2-7b5e1d1662a6@linaro.org

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-sn65dsi83-maple-v1-2-5519799a55e5@kernel.org

The ili9322 driver has a volatile_reg() operation in it's regmap which
always returns false. This is redundant since it is the default in the
regmap core, remove the operation for a trivial code size and performance
improvement.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231001-drm-sn65dsi83-maple-v1-1-5519799a55e5@kernel.org

As talked about in commit d2aacaf0 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

For the "otm8009a" driver we fully remove the storing of the "enabled"
state and we remove the double-checking, but we still keep the storing
of the "prepared" state since the backlight code in the driver checks
it. This backlight code may not be perfectly safe since there doesn't
appear to be sufficient synchronization between the backlight driver
(which userspace can call into directly) and the code that's
unpreparing the panel. However, this lack of safety is not new and can
be addressed in a future patch.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.3.I6a4a3c81c78acf5acdc2e5b5d936e19bf57ec07a@changeid

As talked about in commit d2aacaf0 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

For the s6e63m0 panel driver, this actually fixes a subtle/minor error
handling bug in s6e63m0_prepare(). In one error case s6e63m0_prepare()
called s6e63m0_unprepare() directly if there was an error. This call
to s6e63m0_unprepare() would have been a no-op since ctx->prepared
wasn't set yet.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.2.Iabafd062e70f6b6b554cf23eeb75f57a80f7e985@changeid

As talked about in commit d2aacaf0 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

This pile of panel drivers appears to be simple to handle. Based on
code inspection they seemed to be using the prepared/enabled state
simply for double-checking that nothing else in the kernel called them
inconsistently. Now that the core drm_panel is doing the double
checking (and warning) it should be very clear that these devices
don't need their own double-check.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.1.Ia54954fd2f7645c1b86597494902973f57feeb71@changeid

The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C.
This driver is based on the downstream GPLv2 driver released by Google
written by Sean Paul [1], which was then adapted to the newer kernel APIs.

[1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c



Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-3-diogo.ivo@tecnico.ulisboa.pt

Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error is printed.

Fixes error:
panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517

Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz

Link is no longer functional and web.archive.org doesn't provide PDF
with detail information.

Some informations can be found from web.archive.org here:
https://web.archive.org/web/20170629205602/http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet



Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812183404.374718-1-david@ixit.cz

Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA
TFT-LCD module for industrial use.

Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdf


Signed-off-by: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807123138.67443-2-miquel.raynal@bootlin.com

The Jasonic JT240MHQS-HWT-EK-E3 is a custom panel using the Sitronix
ST7789V controller. While the controller features a resolution of
320x240, only an area of 280x240 is visible by design.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-lcd-panel-v2-4-2485ca07b49d@wolfvision.net

The ST7789V controller features support for the partial mode. Here,
the area to be displayed can be restricted in one direction (by default,
in vertical direction). This is useful for panels that are partially
occluded by design. Add support for the partial mode.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-lcd-panel-v2-3-2485ca07b49d@wolfvision.net

Determine the orientation of the display based on the device tree and
propagate it.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-st7789v-v3-2-157d68fb63e2@wolfvision.net

Fix indentation of the callbacks in struct drm_panel_funcs.
No functional changes.

Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-st7789v-v3-1-157d68fb63e2@wolfvision.net

Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf



Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-2-marex@denx.de

Add timings for InnoLux N140HCA-EAC. This panel is found on some laptops
such as Acer Aspire 1.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801-aspire1-cmn-panel-v1-1-c3d88e389805@trvn.ru

A very basic debugging rule when a device is connected for the first
time is to access a read-only register which contains known data in
order to ensure the communication protocol is properly working. This
driver lacked any read helper which is often a critical piece for
speeding-up bring-ups.

Add a read helper and use it to verify the communication with the panel
is working as soon as possible in order to inform the user early if this
is not the case.

As this panel may work with no MISO line, the check is discarded in this
case. Upon error, we do not fail probing but just warn the user, in case
the DT description would be lacking the Rx bus width (which is likely on
old descriptions) in order to avoid breaking existing devices.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org> # no MISO line
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-20-sre@kernel.org

This panel from Emerging Display Technologies Corporation features an
ST7789V2 LCD controller panel inside which is almost identical to what
the Sitronix panel driver supports.

In practice, the module physical size is specific, and experiments show
that the display will malfunction if any of the following situation
occurs:
* Pixel clock is above 3MHz
* Pixel clock is not inverted
I could not properly identify the reasons behind these failures, scope
captures show valid input signals.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-19-sre@kernel.org

The Sitronix datasheet explains BIT(1) of the RGBCTRL register as the
DOTCLK/PCLK edge used to sample the data lines:

    “0” The data is input on the positive edge of DOTCLK
    “1” The data is input on the negative edge of DOTCLK

IOW, this bit implies a falling edge and not a high state. Correct the
definition to ease the comparison with the datasheet.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-18-sre@kernel.org

The Sitronix controller expects 9-bit words, provide this as default at
probe time rather than specifying this in each and every access.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-17-sre@kernel.org

UNI-T UTi260b has a Inanbo T28CP45TN89 v17 panel. I could not find
proper documentation for the panel apart from a technical drawing, but
according to the vendor U-Boot it is based on a Sitronix st7789v chip.
I generated the init sequence by modifying the default one until proper
graphics output has been seen on the device.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-14-sre@kernel.org

Add polarity information via mode and bus flags, so that they are no
longer hardcoded and forward the information to the DRM stack. This is
required for adding panels with different settings.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-13-sre@kernel.org

While the default panel uses invert mode, some panels
require non-invert mode instead.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-12-sre@kernel.org

Add support for describing the media bus format in the
panel configuration and expose that to userspace. Since
both supported formats (RGB565 and RGB666) are using 6
bits per color also hardcode that information.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-11-sre@kernel.org

Move the panel size information to the mode struct, so
that different panel sizes can be specified depending
on the panel type.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-10-sre@kernel.org

Avoid hard-coding the default_mode and supply it from match data. One
additional layer of abstraction has been introduced, which will be
needed for specifying other panel information (e.g. bus flags) in the
next steps.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-9-sre@kernel.org

Improve error handling in the probe routine, so that probe
defer errors are captured in /sys/kernel/debug/devices_deferred

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-8-sre@kernel.org

st7789v_spi_write initializes a message with just
a single transfer, spi_sync_transfer can be used
for that.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-7-sre@kernel.org

The reset pin might not be software controllable from the SoC,
so make it optional.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-6-sre@kernel.org

ST7789V_COLMOD_RGB_FMT_18BITS and ST7789V_COLMOD_CTRL_FMT_18BITS
are unused in favour of MIPI_DCS_PIXEL_FMT_18BIT, remove them.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-5-sre@kernel.org

SPI device drivers should also have a SPI ID table.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-4-sre@kernel.org

The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.

Fixes: 7ee933a1 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de

This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
display using MIPI DSI interface.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711-startek_display-v4-2-fb1d53bfdef6@baylibre.com

Add support for TDO TL050HDV35-H1311A LCD panel.

Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719102616.2259-3-matuszpd@gmail.com

Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm
code from complaining about unexpected bpc value (0).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727172445.1548834-1-dmitry.baryshkov@linaro.org

The newly added driver only builds when DRM_DISPLAY_DP_HELPER is enabled:

x86_64-linux-ld: drivers/gpu/drm/panel/panel-visionox-r66451.o: in function `visionox_r66451_enable':
panel-visionox-r66451.c:(.text+0x105): undefined reference to `drm_dsc_pps_payload_pack'

Select both CONFIG_DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to
ensure the helper function is always available.

Fixes: a6dfab27 ("drm/panel: Add driver for Visionox r66451 panel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719130940.659837-1-arnd@kernel.org

Both the patform_driver and mipi_dsi_driver structures contain pointers
to the match table used, so the custom code to obtain match and match
data can be replaced by calls to of_device_get_match_data().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64ded5b7e809e4c6e915b2c4d8b82e02319cd206.1690535800.git.geert+renesas@glider.be

The driver now uses the backlight interface, which breaks when that
is disabled:

ld.lld: error: undefined symbol: devm_backlight_device_register

Enforce the necessary Kconfig dependency to avoid this.

Fixes: c2268daa ("drm/panel: ld9040: Register a backlight device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724121736.1293270-1-arnd@kernel.org

These variables are never referenced in the code.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719105829.148011-1-luca.ceresoli@bootlin.com