I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.

IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.

The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate

More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf



As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.

Example PMA region passes as a DT node from OpenSBI:
    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add DT binding documentation for L2 cache controller found on RZ/Five SoC.

The Renesas RZ/Five microprocessor includes a RISC-V CPU Core (AX45MP
Single) from Andes. The AX45MP core has an L2 cache controller, this patch
describes the L2 cache block.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-5-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Introduce support for nonstandard noncoherent systems in the RISC-V
architecture. It enables function pointer support to handle cache
management in such systems.

This patch adds a new configuration option called
"RISCV_NONSTANDARD_CACHE_OPS." This option is a boolean flag that
depends on "RISCV_DMA_NONCOHERENT" and enables the function pointer
support for cache management in nonstandard noncoherent systems.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> #
Link: https://lore.kernel.org/r/20230818135723.80612-4-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add required ports of the Alternative scheme for Andes CPU cores.

I/O Coherence Port (IOCP) provides an AXI interface for connecting external
non-caching masters, such as DMA controllers. IOCP is a specification
option and is disabled on the Renesas RZ/Five SoC due to this reason cache
management needs a software workaround.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-3-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add Andes Technology to the vendors list.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-2-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add helper functions for cache wback/inval/clean and use them
arch_sync_dma_for_device()/arch_sync_dma_for_cpu() functions. The proposed
changes are in preparation for switching over to generic implementation.

Reorganization of the code is based on the patch (Link[0]) from Arnd.
For now I have dropped CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU check as this
will be enabled by default upon selection of RISCV_DMA_NONCOHERENT
and also dropped arch_dma_mark_dcache_clean().

Link[0]: https://lore.kernel.org/all/20230327121317.4081816-22-arnd@kernel.org/


Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816232336.164413-4-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
first to let the device see data written by the CPU, and invalidated
after the transfer to let the CPU see data written by the device.

riscv also invalidates the caches before the transfer, which does
not appear to serve any purpose.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816232336.164413-3-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

No other architecture intentionally writes back dirty cache lines into
a buffer that a device has just finished writing into. If the cache is
clean, this has no effect at all, but if a cacheline in the buffer has
actually been written by the CPU,  there is a driver bug that is likely
made worse by overwriting that buffer.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816232336.164413-2-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.

The answer is "No. No we cannot".

I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street.  And at the yearly
maintainer summit, we will all sing the alphabet song together.

I doubt I will keep doing this.  At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.

Repeats: 80e62bc8 ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping fixes from Christoph Hellwig:

 - swiotlb area sizing fixes (Petr Tesarik)

* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: reduce the number of areas to match actual memory pool size
  swiotlb: always set the number of areas before allocating the pool

Pull irq update from Borislav Petkov:

 - Optimize IRQ domain's name assignment

* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Use return value of strreplace()

Pull x86 fpu fix from Borislav Petkov:

 - Do FPU AP initialization on Xen PV too which got missed by the recent
   boot reordering work

* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Fix secondary processors' FPU initialization

Pull x86 fix from Thomas Gleixner:
 "A single fix for the mechanism to park CPUs with an INIT IPI.

  On shutdown or kexec, the kernel tries to park the non-boot CPUs with
  an INIT IPI. But the same code path is also used by the crash utility.
  If the CPU which panics is not the boot CPU then it sends an INIT IPI
  to the boot CPU which resets the machine.

  Prevent this by validating that the CPU which runs the stop mechanism
  is the boot CPU. If not, leave the other CPUs in HLT"

* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Don't send INIT to boot CPU

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes for KVM

 - fix for loongson build and cpu probing

 - DT fixes

* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
  MIPS: dts: add missing space before {
  MIPS: Loongson: Fix build error when make modules_install
  MIPS: KVM: Fix NULL pointer dereference
  MIPS: Loongson: Fix cpu_probe_loongson() again

Pull xfs fix from Darrick Wong:
 "Nothing exciting here, just getting rid of a gcc warning that I got
  tired of seeing when I turn on gcov"

* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix uninit warning in xfs_growfs_data

Pull more smb client updates from Steve French:

 - fix potential use after free in unmount

 - minor cleanup

 - add worker to cleanup stale directory leases

* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add a laundromat thread for cached directories
  smb: client: remove redundant pointer 'server'
  cifs: fix session state transition to avoid use-after-free issue

Pull NTB updates from Jon Mason:
 "Fixes for pci_clean_master, error handling in driver inits, and
  various other issues/bugs"

* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
  ntb: hw: amd: Fix debugfs_create_dir error checking
  ntb.rst: Fix copy and paste error
  ntb_netdev: Fix module_init problem
  ntb: intel: Remove redundant pci_clear_master
  ntb: epf: Remove redundant pci_clear_master
  ntb_hw_amd: Remove redundant pci_clear_master
  ntb: idt: drop redundant pci_enable_pcie_error_reporting()
  MAINTAINERS: git://github -> https://github.com for jonmason
  NTB: EPF: fix possible memory leak in pci_vntb_probe()
  NTB: ntb_tool: Add check for devm_kcalloc
  NTB: ntb_transport: fix possible memory leak while device_register() fails
  ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
  NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
  ntb: idt: Fix error handling in idt_pci_driver_init()

Lockdep is certainly right to complain about

  (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
                 but task is already holding lock:
  (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db

Invert those to the usual ordering.

Fixes: 33313a74 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "16 hotfixes. Six are cc:stable and the remainder address post-6.4
  issues"

The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.

* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  lib: dhry: fix sleeping allocations inside non-preemptable section
  kasan, slub: fix HW_TAGS zeroing with slub_debug
  kasan: fix type cast in memory_is_poisoned_n
  mailmap: add entries for Heiko Stuebner
  mailmap: update manpage link
  bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
  MAINTAINERS: add linux-next info
  mailmap: add Markus Schneider-Pargmann
  writeback: account the number of pages written back
  mm: call arch_swap_restore() from do_swap_page()
  squashfs: fix cache race with migration
  mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
  docs: update ocfs2-devel mailing list address
  MAINTAINERS: update ocfs2-devel mailing list address
  mm: disable CONFIG_PER_VMA_LOCK until its fixed
  fork: lock VMAs of the parent process when forking

When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().

We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable.  For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.

A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.

Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults.  But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.

This fix can potentially regress some fork-heavy workloads.  Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression.  If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance.  Further
optimizations are possible if this regression proves to be problematic.

Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/


Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/


Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624


Fixes: 0bff0aae ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock.  This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified.  Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.

Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.

Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.

Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more SCSI updates from James Bottomley:
 "A few late arriving patches that missed the initial pull request. It's
  mostly bug fixes (the dt-bindings is a fix for the initial pull)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Remove unused function declaration
  scsi: target: docs: Remove tcm_mod_builder.py
  scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
  scsi: dt-bindings: ufs: qcom: Fix ICE phandle
  scsi: core: Simplify scsi_cdl_check_cmd()
  scsi: isci: Fix comment typo
  scsi: smartpqi: Replace one-element arrays with flexible-array members
  scsi: target: tcmu: Replace strlcpy() with strscpy()
  scsi: ncr53c8xx: Replace strlcpy() with strscpy()
  scsi: lpfc: Fix lpfc_name struct packing

Pull more i2c updates from Wolfram Sang:

 - xiic patch should have been in the original pull but slipped through

 - mpc patch fixes a build regression

 - nomadik cleanup

* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mpc: Drop unused variable
  i2c: nomadik: Remove a useless call in the remove function
  i2c: xiic: Don't try to handle more interrupt events after error

Pull hardening fixes from Kees Cook:

 - Check for NULL bdev in LoadPin (Matthias Kaehlcke)

 - Revert unwanted KUnit FORTIFY build default

 - Fix 1-element array causing boot warnings with xhci-hub

* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
  Revert "fortify: Allow KUnit test to build without FORTIFY"
  dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter

The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.

Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Merge tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next

Pull more perf tools updates from Namhyung Kim:
 "These are remaining changes and fixes for this cycle.

  Build:

   - Allow generating vmlinux.h from BTF using `make GEN_VMLINUX_H=1`
     and skip if the vmlinux has no BTF.

   - Replace deprecated clang -target xxx option by --target=xxx.

  perf record:

   - Print event attributes with well known type and config symbols in
     the debug output like below:

       # perf record -e cycles,cpu-clock -C0 -vv true
       <SNIP>
       ------------------------------------------------------------
       perf_event_attr:
         type                             0 (PERF_TYPE_HARDWARE)
         size                             136
         config                           0 (PERF_COUNT_HW_CPU_CYCLES)
         { sample_period, sample_freq }   4000
         sample_type                      IP|TID|TIME|CPU|PERIOD|IDENTIFIER
         read_format                      ID
         disabled                         1
         inherit                          1
         freq                             1
         sample_id_all                    1
         exclude_guest                    1
       ------------------------------------------------------------
       sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 5
       ------------------------------------------------------------
       perf_event_attr:
         type                             1 (PERF_TYPE_SOFTWARE)
         size                             136
         config                           0 (PERF_COUNT_SW_CPU_CLOCK)
         { sample_period, sample_freq }   4000
         sample_type                      IP|TID|TIME|CPU|PERIOD|IDENTIFIER
         read_format                      ID
         disabled                         1
         inherit                          1
         freq                             1
         sample_id_all                    1
         exclude_guest                    1

   - Update AMD IBS event error message since it now support per-process
     profiling but no priviledge filters.

       $ sudo perf record -e ibs_op//k -C 0
       Error:
       AMD IBS doesn't support privilege filtering. Try again without
       the privilege modifiers (like 'k') at the end.

  perf lock contention:

   - Support CSV style output using -x option

       $ sudo perf lock con -ab -x, sleep 1
       # output: contended, total wait, max wait, avg wait, type, caller
       19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
       15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
       4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
       1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
       8, 67608, 27404, 8451, spinlock, __queue_work+0x174
       3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
       3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
       2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
       1, 24619, 24619, 24619, spinlock, rcu_core+0xd4

   - Add --output option to save the data to a file not to be interfered
     by other debug messages.

  Test:

   - Fix event parsing test on ARM where there's no raw PMU nor supports
     PERF_PMU_CAP_EXTENDED_HW_TYPE.

   - Update the lock contention test case for CSV output.

   - Fix a segfault in the daemon command test.

  Vendor events (JSON):

   - Add has_event() to check if the given event is available on system
     at runtime. On Intel machines, some transaction events may not be
     present when TSC extensions are disabled.

   - Update Intel event metrics.

  Misc:

   - Sort symbols by name using an external array of pointers instead of
     a rbtree node in the symbol. This will save 16-bytes or 24-bytes
     per symbol whether the sorting is actually requested or not.

   - Fix unwinding DWARF callstacks using libdw when --symfs option is
     used"

* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
  perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
  perf test: Fix event parsing test on Arm
  perf evsel amd: Fix IBS error message
  perf: unwind: Fix symfs with libdw
  perf symbol: Fix uninitialized return value in symbols__find_by_name()
  perf test: Test perf lock contention CSV output
  perf lock contention: Add --output option
  perf lock contention: Add -x option for CSV style output
  perf lock: Remove stale comments
  perf vendor events intel: Update tigerlake to 1.13
  perf vendor events intel: Update skylakex to 1.31
  perf vendor events intel: Update skylake to 57
  perf vendor events intel: Update sapphirerapids to 1.14
  perf vendor events intel: Update icelakex to 1.21
  perf vendor events intel: Update icelake to 1.19
  perf vendor events intel: Update cascadelakex to 1.19
  perf vendor events intel: Update meteorlake to 1.03
  perf vendor events intel: Add rocketlake events/metrics
  perf vendor metrics intel: Make transaction metrics conditional
  perf jevents: Support for has_event function
  ...

Pull bitmap updates from Yury Norov:
 "Fixes for different bitmap pieces:

   - lib/test_bitmap: increment failure counter properly

     The tests that don't use expect_eq() macro to determine that a test
     is failured must increment failed_tests explicitly.

   - lib/bitmap: drop optimization of bitmap_{from,to}_arr64

     bitmap_{from,to}_arr64() optimization is overly optimistic
     on 32-bit LE architectures when it's wired to
     bitmap_copy_clear_tail().

   - nodemask: Drop duplicate check in for_each_node_mask()

     As the return value type of first_node() became unsigned, the node
     >= 0 became unnecessary.

   - cpumask: fix function description kernel-doc notation

   - MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record

     Add linux/bits.h and linux/bitfield.h for visibility"

* tag 'bitmap-6.5-rc1' of https://github.com/norov/linux:
  MAINTAINERS: Add bitfield.h to the BITMAP API record
  MAINTAINERS: Add bits.h to the BITMAP API record
  cpumask: fix function description kernel-doc notation
  nodemask: Drop duplicate check in for_each_node_mask()
  lib/bitmap: drop optimization of bitmap_{from,to}_arr64
  lib/test_bitmap: increment failure counter properly

The Smatch static checker reports the following warnings:

    lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context
    lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context

Indeed, dhry() does sleeping allocations inside the non-preemptable
section delimited by get_cpu()/put_cpu().

Fix this by using atomic allocations instead.
Add error handling, as atomic these allocations may fail.

Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be


Fixes: 13684e96 ("lib: dhry: fix unstable smp_processor_id(_) usage")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/0469eb3a-02eb-4b41-b189-de20b931fa56@moroto.mountain


Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit 946fa0db ("mm/slub: extend redzone check to extra allocated
kmalloc space than requested") added precise kmalloc redzone poisoning to
the slub_debug functionality.

However, this commit didn't account for HW_TAGS KASAN fully initializing
the object via its built-in memory initialization feature.  Even though
HW_TAGS KASAN memory initialization contains special memory initialization
handling for when slub_debug is enabled, it does not account for in-object
slub_debug redzones.  As a result, HW_TAGS KASAN can overwrite these
redzones and cause false-positive slub_debug reports.

To fix the issue, avoid HW_TAGS KASAN memory initialization when
slub_debug is enabled altogether.  Implement this by moving the
__slub_debug_enabled check to slab_post_alloc_hook.  Common slab code
seems like a more appropriate place for a slub_debug check anyway.

Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com


Fixes: 946fa0db ("mm/slub: extend redzone check to extra allocated kmalloc space than requested")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: kasan-dev@googlegroups.com
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit bb6e04a1 ("kasan: use internal prototypes matching gcc-13
builtins") introduced a bug into the memory_is_poisoned_n implementation:
it effectively removed the cast to a signed integer type after applying
KASAN_GRANULE_MASK.

As a result, KASAN started failing to properly check memset, memcpy, and
other similar functions.

Fix the bug by adding the cast back (through an additional signed integer
variable to make the code more readable).

Link: https://lkml.kernel.org/r/8c9e0251c2b8b81016255709d4ec42942dcaf018.1688431866.git.andreyknvl@google.com


Fixes: bb6e04a1 ("kasan: use internal prototypes matching gcc-13 builtins")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I am going to lose my vrull.eu address at the end of july, and while
adding it to mailmap I also realised that there are more old addresses
from me dangling, so update .mailmap for all of them.

Link: https://lkml.kernel.org/r/20230704163919.1136784-3-heiko@sntech.de


Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Update .mailmap for my work address and fix manpage".

While updating mailmap for the going-away address, I also found that on
current systems the manpage linked from the header comment changed.

And in fact it looks like the git mailmap feature got its own manpage.


This patch (of 2):

On recent systems the git-shortlog manpage only tells people to
    See gitmailmap(5)

So instead of sending people on a scavenger hunt, put that info into the
header directly.  Though keep the old reference around for older systems.

Link: https://lkml.kernel.org/r/20230704163919.1136784-1-heiko@sntech.de
Link: https://lkml.kernel.org/r/20230704163919.1136784-2-heiko@sntech.de


Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

commit dd0ff4d1 ("bootmem: remove the vmemmap pages from kmemleak in
put_page_bootmem") fix an overlaps existing problem of kmemleak.  But the
problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in
this case, free_bootmem_page() will call free_reserved_page() directly.

Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when
HAVE_BOOTMEM_INFO_NODE is disabled.

Link: https://lkml.kernel.org/r/20230704101942.2819426-1-liushixin2@huawei.com


Fixes: f41f2ed4 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add linux-next info to MAINTAINERS for ease of finding this data.

Link: https://lkml.kernel.org/r/20230704054410.12527-1-rdunlap@infradead.org


Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add my old mail address and update my name.

Link: https://lkml.kernel.org/r/20230628081341.3470229-1-msp@baylibre.com


Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nr_to_write is a count of pages, so we need to decrease it by the number
of pages in the folio we just wrote, not by 1.  Most callers specify
either LONG_MAX or 1, so are unaffected, but writeback_sb_inodes() might
end up writing 512x as many pages as it asked for.

Dave added:

: XFS is the only filesystem this would affect, right?  AFAIA, nothing
: else enables large folios and uses writeback through
: write_cache_pages() at this point...
: 
: In which case, I'd be surprised if much difference, if any, gets
: noticed by anyone.

Link: https://lkml.kernel.org/r/20230628185548.981888-1-willy@infradead.org


Fixes: 793917d9 ("mm/readahead: Add large folio readahead")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit c145e0b4 ("mm: streamline COW logic in do_swap_page()") moved
the call to swap_free() before the call to set_pte_at(), which meant that
the MTE tags could end up being freed before set_pte_at() had a chance to
restore them.  Fix it by adding a call to the arch_swap_restore() hook
before the call to swap_free().

Link: https://lkml.kernel.org/r/20230523004312.1807357-2-pcc@google.com
Link: https://linux-review.googlesource.com/id/I6470efa669e8bd2f841049b8c61020c510678965


Fixes: c145e0b4 ("mm: streamline COW logic in do_swap_page()")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reported-by: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Closes: https://lore.kernel.org/all/5050805753ac469e8d727c797c2218a9d780d434.camel@mediatek.com/


Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>	[6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Migration replaces the page in the mapping before copying the contents and
the flags over from the old page, so check that the page in the page cache
is really up to date before using it.  Without this, stressing squashfs
reads with parallel compaction sometimes results in squashfs reporting
data corruption.

Link: https://lkml.kernel.org/r/20230629-squashfs-cache-migration-v1-1-d50ebe55099d@axis.com


Fixes: e994f5b6 ("squashfs: cache partial compressed blocks")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>