The Innolux G070Y2-L01 supports two modes of operation:
1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6
2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8

Currently the panel description mixes both, BPP from 1) and bus
format from 2), which triggers a warning at panel-simple.c:615.

Pick the later, set bpp=8, fix the warning.

Fixes: a5d2ade6 ("drm/panel: simple: Add support for Innolux G070Y2-L01")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141ced does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.

Fixes: fe141ced ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

commit f86c3ed5 ("drm/mgag200: Split PLL setup into compute and
 update functions") introduced a regression for g200wb and g200ew.
The PLLs are not set up properly, and VGA screen stays
black, or displays "out of range" message.

MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with
MGA1064_PIX_PLLC_N/M/P which have different addresses.

Patch tested on a Dell T310 with g200wb

Fixes: f86c3ed5 ("drm/mgag200: Split PLL setup into compute and update functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308174321.225606-1-jfalempe@redhat.com

As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.

  arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
    `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
    `drm_panel_dp_aux_backlight'
  make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1

The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]

v2:
	* fix and expand commit description (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9d6366e7 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1]
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de


Signed-off-by: Dave Airlie <airlied@redhat.com>

Commit 5dbbbd01 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.

Reproducer:
```
#!/bin/sh

ip link add lag0 type bond mode 1 miimon 100
ip link set lag0

for n in {1..10}; do
        echo Cycle: $n
        ip link set ens7f0 master lag0
        sleep 1
        ip link set ens7f0 nomaster
done
```

This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871]  __schedule+0x2d1/0x830
[20976.219364]  schedule+0x35/0xa0
[20976.222510]  schedule_preempt_disabled+0xa/0x10
[20976.227043]  __mutex_lock.isra.7+0x310/0x420
[20976.235071]  enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215]  ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192]  ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079]  ib_register_device+0x40d/0x580 [ib_core]
[20976.266139]  irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409]  irdma_probe+0x2c1/0x360 [irdma]
[20976.285691]  auxiliary_bus_probe+0x45/0x70
[20976.289790]  really_probe+0x1f2/0x480
[20976.298509]  driver_probe_device+0x49/0xc0
[20976.302609]  bus_for_each_drv+0x79/0xc0
[20976.306448]  __device_attach+0xdc/0x160
[20976.310286]  bus_probe_device+0x9d/0xb0
[20976.314128]  device_add+0x43c/0x890
[20976.321287]  __auxiliary_device_add+0x43/0x60
[20976.325644]  ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109]  ice_service_task+0xd0c/0xed0 [ice]
[20976.342591]  process_one_work+0x1a7/0x360
[20976.350536]  worker_thread+0x30/0x390
[20976.358128]  kthread+0x10a/0x120
[20976.365547]  ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip              state:D stack:    0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921]  __schedule+0x2d1/0x830
[20976.452414]  schedule+0x35/0xa0
[20976.455559]  schedule_preempt_disabled+0xa/0x10
[20976.460090]  __mutex_lock.isra.7+0x310/0x420
[20976.464364]  device_del+0x36/0x3c0
[20976.467772]  ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313]  ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288]  notifier_call_chain+0x47/0x70
[20976.481386]  __netdev_upper_dev_link+0x18b/0x280
[20976.489845]  bond_enslave+0xe05/0x1790 [bonding]
[20976.494475]  do_setlink+0x336/0xf50
[20976.502517]  __rtnl_newlink+0x529/0x8b0
[20976.543441]  rtnl_newlink+0x43/0x60
[20976.546934]  rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238]  netlink_rcv_skb+0x4c/0x120
[20976.563079]  netlink_unicast+0x196/0x230
[20976.567005]  netlink_sendmsg+0x204/0x3d0
[20976.570930]  sock_sendmsg+0x4c/0x50
[20976.574423]  ____sys_sendmsg+0x1eb/0x250
[20976.586807]  ___sys_sendmsg+0x7c/0xc0
[20976.606353]  __sys_sendmsg+0x57/0xa0
[20976.609930]  do_syscall_64+0x5b/0x1a0
[20976.613598]  entry_SYSCALL_64_after_hwframe+0x65/0xca

1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
   is called from ice_service_task() context, aux device is created
   and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
   RTNL lock and that notifier calls ice_unplug_aux_dev(). That
   function tries to take aux device->lock but this is already taken
   by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
   taken in step 2
4. Dead-lock

The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
  call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
  then ice_unplug_aux_dev() is called. If it is set (in other words
  plugging of aux device was requested and ice_plug_aux_dev() is
  potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
  the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
  whether it was already cleared by ice_clear_rdma_cap(). If so then
  aux device is unplugged.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.

According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.

Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:

"Supports Wake-on: gsf"

which is false.

Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:

"Supports Wake-on: d"

This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.

Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.

We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.

Fixes: 95b5fc03 ("net: arc_emac: Make use of the helper function dev_err_probe()")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.

Fixes: 87461f7a ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 7349a74e ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Just noticed this when applying Andy's patch. s/childred/children/

Fixes: cb8c474e ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.

Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.

Fixes: 9c668632 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.

port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free

Fail log:

BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670

...

Allocated by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
 alloc_dr drivers/base/devres.c:116 [inline]
 devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
 devm_kzalloc include/linux/device.h:209 [inline]
 port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502

Freed by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:236 [inline]
 __cache_free mm/slab.c:3437 [inline]
 kfree+0xf8/0x2b0 mm/slab.c:3794
 release_nodes+0x112/0x1a0 drivers/base/devres.c:501
 devres_release_all+0x114/0x190 drivers/base/devres.c:530
 really_probe+0x626/0xcc0 drivers/base/dd.c:670

Reported-and-tested-by:  <syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com>
Fixes: 0347a6ab ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the
first place to enforce suitability between connected TIR and RQ, this
enforcement does not exist in current the Firmware implementation and was
redundant in the first place.

Fixes: 83439f3c ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.

Fixes: 544fe7c2 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.

Fixes: d671e109 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.

It fixes the following warning trace:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
 <TASK>
 mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
 mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
 enter_error_state+0x44/0x80 [mlx5_core]
 mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
 process_one_work+0x1be/0x390
 worker_thread+0x4d/0x3d0
 ? rescuer_thread+0x350/0x350
 kthread+0x141/0x160
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 50b2412b ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5a ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.

Fixes: 5cdaaa12 ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.

Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)

Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_misc_intr() is an irq handler. It should not sleep.

Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held.  This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev.  Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.

Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.

This logic was added to the ice driver in commit 1071a835 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac ("i40e: implement virtual
device interface").

Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.

The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.

Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.

This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.

In fact, the change from dev_err to dev_info in i40e commit 18b7af57
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.

We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.

Fixes: 1071a835 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.

This logic originates from the early implementation of VF support in
commit 5c3c48ac ("i40e: implement virtual device interface").

That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.

There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf508 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.

That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.

It is clear this check does not make sense, and causes problems which
led to ugly workarounds.

Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.

Fixes: 01cbf508 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED
which should indicate that interrupts need to be completely
reinitialized during reset leads to RTNL deadlocks using ethtool -C
while a reset is in progress.
To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED
used to trigger MSI-X reinit.
New combined setting is fixed adopt after VF reset.
This has been implemented by call reinit interrupt scheme
during VF reset.
Without this fix new combined setting has never been adopted.

Fixes: 209f2f9c ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.

Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.

Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com


Signed-off-by: Mark Brown <broonie@kernel.org>

Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.

Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk


Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It turns out that DE3 manual has inverted YUV and YVU format numbers for
P010 and P210. Invert them.

This was tested by playing video decoded to P010 and additionally
confirmed by looking at BSP driver source.

Fixes: 169ca4b3 ("drm/sun4i: Add separate DE3 VI layer formats")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com

Compiler is not happy:

  warning: symbol 'gpio_sim_hog_config_item_ops' was not declared. Should it be static?

Fixes: cb8c474e ("gpio: sim: new testing module")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Use Krzysztof Kozlowski's @kernel.org account in maintainer entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220307172805.156760-1-krzysztof.kozlowski@canonical.com

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The root of the problem is that we are selecting symbols that have
dependencies. This can cause random configurations that can fail.
The cleanest solution is to avoid using select.

This driver uses interfaces from the OMAP_GPMC driver so we have to
depend on it instead.

Fixes: 4cd335da ("mtd: rawnand: omap2: Prevent invalid configuration and build error")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org

Currently we are observing occasional screen flickering when
PSR2 selective fetch is enabled. More specifically glitch seems
to happen on full frame update when cursor moves to coords
x = -1 or y = -1.

According to Bspec SF Single full frame should not be set if
SF Partial Frame Enable is not set. This happened to be true for
ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's
actually "SF Partial Frame Enable" (Bit 31).

Setting "SF Partial Frame Enable" bit also on full update seems to
fix screen flickering.

Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE
only if not on ADL_P. Bit 31 has different meaning in ADL_P.

Bspec: 49274

v2: Fix Mihai Harpau email address
v3: Modify commit message and remove unnecessary comment

Tested-by: Lyude Paul <lyude@redhat.com>
Fixes: 7f6002e5 ("drm/i915/display: Enable PSR2 selective fetch by default")
Reported-by: Lyude Paul <lyude@redhat.com>
Cc: Mihai Harpau <mharpau@gmail.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/5077


Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225070228.855138-1-jouni.hogander@intel.com


(cherry picked from commit 8d5516d1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

It appears that GPIO ACPI library uses ACPI debounce values directly.
However, the GPIO library APIs expect the debounce timeout to be in
microseconds.

Convert ACPI value of debounce to microseconds.

While at it, document this detail where it is appropriate.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664


Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Fixes: 8dcb7a15 ("gpiolib: acpi: Take into account debounce settings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Some GPIO lines have stopped working after the patch
commit 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges")

And this has supposedly been fixed in the following patches
commit 89ad556b ("gpio: Avoid using pin ranges with !PINCTRL")
commit 6dbbf846 ("gpiolib: Don't free if pin ranges are not defined")

But an erratic behavior where some GPIO lines work while others do not work
has been introduced.

This patch reverts those changes so that the sysfs-gpio interface works
properly again.

Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add the number of interrupts per bank for Tegra241 (Grace) to
fix the probe failure.

Fixes: d1056b77 ("gpio: tegra186: Add support for Tegra241")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.

This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.

This causes the following errors to be shown on reboot, for example:

ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system

Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.

Fixes: a049a30f ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>