The DSI version of the panel behaved instable and close
scrutiny of the vendor driver from the Samsung
GT-S8190 shows a different initialization sequence for
the DSI mode panel than the DPI mode panel.

Make the initialization depend on whether we are in
DSI or DPI mode and handle the differences.

After this the panel on the GT-I8190 becomes much more
stable.

Also spell out some more custom DCS commands found in
the vendor source code to cut down a bit on magic
where we can.

Fixes: f0aee45f ("drm/panel: s6e63m0: Fix init sequence")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205122229.1952980-1-linus.walleij@linaro.org

I forgot to add these when posting up the support for BOE
NV110WTM-N61.  Add them now.

Fixes: a96ee0f6 ("drm: panel: simple: Add BOE NV110WTM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201125554.v2.1.I8a7bfc0966e803ab91001c9e6d01a736950c4981@changeid

In commit 131f909a ("drm: panel: simple: Fixup the struct
panel_desc kernel doc") I transitioned the more deeply nested
kerneldoc comments into the inline style.  Apparently it is desirable
to continue the job and move _everything_ in this struct to inline.
Let's do it.

While doing this, we also add a short summary for the whole struct to
fix a warning when we run with extra warnings, AKA:
  scripts/kernel-doc -v -rst drivers/gpu/drm/panel/panel-simple.c

The warning was:
  drivers/gpu/drm/panel/panel-simple.c:42: warning: missing initial short description on line:
   * struct panel_desc

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201125822.1.I3c4191336014bd57364309439e56f600c94bb12b@changeid

Add support for the BOE NV110WTM-N61 panel.  The EDID lists two modes
(one for 60 Hz refresh rate and one for 40 Hz), so we'll list both of
them here.

Note that the panel datasheet requires 80 ms between HPD asserting and
the backlight power being turned on.  We'll use the new timing
constraints structure to do this cleanly.  This assumes that the
backlight will be enabled _after_ the panel enable finishes.  This is
how it works today and seems a sane assumption.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.4.I71b2118dfc00fd7b43b02d28e7b890081c2acfa2@changeid

On the panel I'm looking at, there's an 80 ms minimum time between HPD
being asserted by the panel and setting the backlight enable GPIO.
While we could just add an 80 ms "enable" delay, this is not ideal.
Link training is allowed to happen in parallel with this delay so the
fixed 80 ms delay over-delays.

We'll support this by logging the time at the end of prepare and then
delaying in enable if enough time hasn't passed.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.3.Ib9ce3c6482f464bf594161581521ced46bbd54ed@changeid

It is believed that all of the current users of the "unprepare" delay
don't actually need to wait the amount of time specified directly in
the unprepare phase.  The purpose of the delay that's specified is to
allow the panel to fully power off so that we don't try to power it
back on before it's managed to full power down.

Let's use this observation to avoid the fixed delay that we currently
have.  Instead of delaying, we'll note the current time when the
unprepare happens.  If someone then tries to prepare the panel later
and not enough time has passed, we'll do the delay before starting the
prepare phase.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.2.I06a95d83e7fa1bd919c8edd63dacacb5436e495a@changeid

When I run:
  scripts/kernel-doc -rst drivers/gpu/drm/panel/panel-simple.c

I see that several of the kernel-doc entries aren't showing up because
they don't specify the full path down the hierarchy.  Let's fix that
and also move to inline kernel docs.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.1.Icaa86f0a4ca45a9a7184da4bc63386b29792d613@changeid

The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop,
attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge.

Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124172604.981746-1-lukas@mntre.com

The init sequence consist of a number of unknown settings
for the display controller. This patch achieves two things:

- Fix an error that must have happened when the driver was
  converted from the backlight subsystem: the 0xb8
  configuration command was lost and added as a tail to
  the previous command.

- Update some minor settings in some bytes here and there
  according to changes in the Samsung GT-I9070 and
  Samsung GT-S7710 code dumps. Since two other devices use
  these settings they probably reflect trimmings later
  found to be better for the display rather than
  customizations for these devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-3-linus.walleij@linaro.org

A later version of the s6e63m0 driver in the Samsung
GT-I9070 vendor tree provides 28 different backlight
levels making use of elaborate control of the ACL
and ELVSS regulator. Implement this more fine-grained
backlight control.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-2-linus.walleij@linaro.org

Fix up the format of the manufacturer command set table
to be TAB-indented and lowercase. Add the MCS_TEMP_SWIRE
command that we will make use of.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-1-linus.walleij@linaro.org

Add support for the ShenZhen Asia Better Technology Ltd. Y030XX067A 3.0"
320x480 IPS panel.

This panel can be found in the YLM RG-280M, RG-300 and RG-99 handheld
gaming consoles. While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-5-paul@crapouillou.net

Copy over the width/height in millimeters to the
(somewhat redundant) display info, and set up the
bus format and bus flags for the display.

When used as DPI this display requires DE to be
active low and pixel data to be output on the
negative edge. It might be that it was previously
used with a display controller that either does
not support these settings or was hardcoded to use
these as default. This information comes from the
source code of the Samsung GT-I9070 mobile phone.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-6-linus.walleij@linaro.org

The panel can be connected using 3WIRE, then it is
however necessary that the flag SPI_3WIRE is preserved
on the device, as we set this from generic device tree
parsing code (or similar). Just |= the SPI mode.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-5-linus.walleij@linaro.org

The SPI DCS code was a bit hard to understand as the
device accepts 9-bit transfers packed into 16-bit words
with the most significant bit in bit 9 of the
16-bit word. Add some clarifying comments.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-4-linus.walleij@linaro.org

This code was found in the Samsung vendor tree for the
Samsung GT-I9070 mobile phone. Let's support reading before
we implement the 3WIRE protocol for both reading and
writing.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-3-linus.walleij@linaro.org

This writing code is equivalent to the spi_write()
helper in the SPI framework. Insert a comment
that this will always work fine since SPI buffers
are in native endianness.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-2-linus.walleij@linaro.org

The OnePlus 6/T devices use different panels however they are
functionally identical with the only differences being the resolution.
The panels also don't seem to be used by any other devices, just combine
them into one driver.

The panels are: samsung,sofef00
and             samsung,s6e3fc2x01

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/panel/panel-tpo-tpg110.c:94: warning: Function parameter or member 'panel_mode' not described in 'tpg110'
 drivers/gpu/drm/panel/panel-tpo-tpg110.c:372: warning: Function parameter or member 'connector' not described in 'tpg110_get_modes'

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113134938.4004947-14-lee.jones@linaro.org

Reading the EDID of this panel shows that these flags should be set. Set
them so that we match what is in the EDID.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: b0c664cc ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org

Fix the warning message "missing connector type" by adding connector_type
for EDT ETM0700G0DH6 panel.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020094910.4756-1-biju.das.jz@bp.renesas.com

Add the missing platform_driver_unregister() before return
from panel_simple_init in the error handling case when failed
to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI
enabled.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201031011856.137307-1-miaoqinglang@huawei.com

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_THROUGH' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_ALIGNED' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_320X240' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_360X240' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_1' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_THROUGH' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_ALIGNED' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_640X320_YCBCR' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_720X360_YCBCR' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_2' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR' not described in enum 'ili9322_input'
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_UNKNOWN' not described in enum 'ili9322_input'

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-17-lee.jones@linaro.org

Struct headers should start with 'struct <name>'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/panel/panel-simple.c:42: warning: Cannot understand  * @modes: Pointer to array of fixed modes appropriate for this panel.  If

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-12-lee.jones@linaro.org

The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to
output an image. Only deasserting RESX is not enough and the display
will stay blank. Deassert in prepare() and assert in unprepare() to keep
device held in reset when off.

Fixes: 72967d56 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org

Don't dereference mode which was just NULL checked.

Fixes: 72967d56 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org

This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com

Add panel timings for YTC700TLAG-05-201C 7" TFT LCD panel from
Yes Optoelectronics Co.,Ltd.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904180821.302194-3-jagan@amarulasolutions.com

This eliminates the following sparse warning:

drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol
'jh057n00900_panel_desc' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
[Use static const]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912033809.142773-1-yanaijie@huawei.com

Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915032623.1772361-1-liushixin2@huawei.com

Compute new timings to get a framerate of 50fps with a pixel clock
@54Mhz.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925141618.12097-1-yannick.fertre@st.com

The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to
output an image. Only deasserting RESX is not enough and the display
will stay blank. Deassert in prepare() and assert in unprepare() to keep
device held in reset when off.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ba71a8ab010d263a8058dd4f711e3bcd95877bf2.1602584953.git.agx@sigxcpu.org

Don't dereference mode which was just NULL checked.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/659158549f3c6cc1c71ceed0943e760e861c1206.1602584953.git.agx@sigxcpu.org

Novatek NT36672a is a generic DSI IC that drives command and video mode
panels. Add the driver for it.

Right now adding support for some Poco F1 phones that have an LCD panel
from Tianma connected with this IC, with a resolution of 1080x2246 that
operates in DSI video mode.

During testing, Benni Steini <bennisteinir@gmail.com> helped us fix
the reset sequence timing (from 10ms to 20ms), to get the bootanimation
to work on Android.

With current AOSP, we need to increase it to 200ms - this seems to be a
safe high value to avoid a white screen occasionally.

Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org

The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.

Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.

Changes in v2:
  - Added my signed-off

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com

The panel is able to receive commands in LP. The current hack to
force backlight commands in HS was due to workaround an incorrect
settings on DSI controller that prevents sending LP commands while
video out was active.

Remove the hack that forces HS commands.

Changes in v2:
  - Added my signed-off

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074242.28719-1-yannick.fertre@st.com

The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.

Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918114736.11322-1-yannick.fertre@st.com

Simplify the return expression.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921131018.91513-1-miaoqinglang@huawei.com

This eliminates the following sparse warning:

drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c:217:15: warning: symbol
'vint_table' was not declared. Should it be static?

While at it, make the table const as it is never modified.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916132301.2914017-1-yanaijie@huawei.com

Kbuild warns when this file is built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-samsung-s6e63m0.o

Add the missing license/author/description tags.

Fixes: b7b23e44 ("drm/panel: s6e63m0: Break out SPI transport")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909134137.32284-1-yuehaibing@huawei.com