Fixes the !vbo_fifo path in the 3D driver on certain chipsets.  Still not
really any good idea of what exactly the magic achieves, but it makes
things work.

While we're at it, in the PCIEGART path, flush on unbinding also.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This can't actually happen right now, but lets fix it anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The GPIO_I2C_INFO table does not always have
ATOM_MAX_SUPPORTED_DEVICE entries. Limit
the number of indices to the size of the
table.

Should fix Novell bug 589022.

v2: fix typo

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Gleaned from the Mesa code.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27355

 .

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some GPUs have an APM/ACPI PM mode selection switch and some BIOSes
set this to APM. We really want this in ACPI mode for Linux.

Signed-off-by: Dave Airlie <airlied@redhat.com>

These GPUs should be setting these registers up also.

Signed-off-by: Dave Airlie <airlied@redhat.com>

If we resume in a bad way, we'll get 0xffffffff in wptr, and then
oops with no console. This just adds a sanity check so that we can
avoid the oops and hopefully get more details out of people's systems.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Need to enable the VID stream after link training

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Turn off hw i2c by default except for mm i2c which
is hw only until we sort out the remaining prescale
issues on older chips.  hw i2c can be enabled with
hw_i2c=1.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This allows us to remove the internal bit algo bus used by
the radeon i2c algo.  We now register a radeon algo adapter
if the gpio line is hw capable and the hw inplementation is
available, otherwise we register a bit algo adapter.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Doesn't seem to work reliably and the pci quirks don't
always work.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- Add module option to force the display priority
  0 = auto, 1 = normal, 2 = high
- Default to high on r3xx/r4xx/rv515 chips
  Fixes flickering problems during heavy acceleration
  due to underflow to the display controllers
- Fill in minimal support for RS600

v2 - update display priority when bandwidth is updated
so the user can change the parameter at runtime and it
will take affect on the next modeset.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Seems to have gotten lost in the evergreen merge.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some systems have LCD* rather than DFP* device tags in the bios
for eDP connectors; notably the new apple iMac. This fixes
things up so eDP connectors with either tag will work.

v2: fix typo

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Looks like a copy/paste typo from when evergreen support
was added.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- 8 lane links are not valid for DP
- remove unused num var

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This prevented radeon.test=1 from testing transfers from/to GTT beyond the
visible VRAM size.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fix build error when CONFIG_MAGIC_SYSRQ is not enabled:

drivers/gpu/drm/drm_fb_helper.c:915: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)
drivers/gpu/drm/drm_fb_helper.c:929: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- remove a few more drm only regs
- remove sampler, alu, bool, loop constant regs.
  They are set via separate packet3's already

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- Drop some more safe regs taht userspace shouldn't hit
- Constant base regs need relocs.  This allows us to use
constant buffers rather than the constant register file.
Also we don't want userspace to be able to set arbitrary
mc base values for the const caches.
- Track SQ_CONFIG so we know whether userspace is using
the cfile or constant buffers.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Only the drm should be touching them.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Replace a BUG_ON with an error code in the event that the inode mapping
changes between calls to drm_open. This may happen for instance if udev
is loaded subsequent to the original opening of the device:

[  644.291870] kernel BUG at drivers/gpu/drm/drm_fops.c:146!
[  644.291876] invalid opcode: 0000 [#1] SMP
[  644.291882] last sysfs file: /sys/kernel/uevent_seqnum
[  644.291888]
[  644.291895] Pid: 7276, comm: lt-cairo-test-s Not tainted 2.6.34-rc1 #2 N150/N210/N220             /N150/N210/N220
[  644.291903] EIP: 0060:[<c11c70e3>] EFLAGS: 00210283 CPU: 0
[  644.291912] EIP is at drm_open+0x4b1/0x4e2
[  644.291918] EAX: f72d8d18 EBX: f790a400 ECX: f73176b8 EDX: 00000000
[  644.291923] ESI: f790a414 EDI: f790a414 EBP: f647ae20 ESP: f647adfc
[  644.291929]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  644.291937] Process lt-cairo-test-s (pid: 7276, ti=f647a000 task=f73f5c80 task.ti=f647a000)
[  644.291941] Stack:
[  644.291945]  00000000 f7bb7400 00000080 f6451100 f73176b8 f6479214 f6451100 f73176b8
[  644.291957] <0> c1297ce0 f647ae34 c11c6c04 f73176b8 f7949800 00000000 f647ae54 c1080ac5
[  644.291969] <0> f7949800 f6451100 00000000 f6451100 f73176b8 f6452780 f647ae70 c107d1e6
[  644.291982] Call Trace:
[  644.291991]  [<c11c6c04>] ? drm_stub_open+0x8a/0xb8
[  644.292000]  [<c1080ac5>] ? chrdev_open+0xef/0x106
[  644.292008]  [<c107d1e6>] ? __dentry_open+0xd4/0x1a6
[  644.292015]  [<c107d35b>] ? nameidata_to_filp+0x31/0x45
[  644.292022]  [<c10809d6>] ? chrdev_open+0x0/0x106
[  644.292030]  [<c10864e2>] ? do_last+0x346/0x423
[  644.292037]  [<c108789f>] ? do_filp_open+0x190/0x415
[  644.292046]  [<c1071eb5>] ? handle_mm_fault+0x214/0x710
[  644.292053]  [<c107d008>] ? do_sys_open+0x4d/0xe9
[  644.292061]  [<c1016462>] ? do_page_fault+0x211/0x23f
[  644.292068]  [<c107d0f0>] ? sys_open+0x23/0x2b
[  644.292075]  [<c1002650>] ? sysenter_do_call+0x12/0x26
[  644.292079] Code: 89 f0 89 55 dc e8 8d 96 0a 00 8b 45 e0 8b 55 dc 83 78 04 01 75 28 8b 83 18 02 00 00 85 c0 74 0f 8b 4d ec 3b 81 ac 00 00 00 74 13 <0f> 0b eb fe 8b 4d ec 8b 81 ac 00 00 00 89 83 18 02 00 00 89 f0
[  644.292143] EIP: [<c11c70e3>] drm_open+0x4b1/0x4e2 SS:ESP 0068:f647adfc
[  644.292175] ---[ end trace 2ddd476af89a60fa ]---

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

When there is allocation failure in radeon_cs_parser_relocs parser->nrelocs
is not cleaned. This causes NULL pointer defeference in radeon_cs_parser_fini
when clean up code is trying to loop over the relocation array and free the
objects.

Fix adds a check for a possible NULL pointer in clean up code.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

radeon_gart_fini might call GART unbind callback function which
might try to access GART table but if gart_disable is call first
the GART table will be unmapped so any access to it will oops.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We can get this if the user moves the mouse when we are waiting to move
some stuff around in the validate. Don't fail.

Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Check that atom cmd and data tables are valid
before using them.

(v2)
- fix some whitespace errors noticed by Rafał Miłecki
- check a few more cases

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- no longer needed with the latest new pll algo fixes.
- also don't use lcd pll limits.  They don't seem
to work well for all systems.  If we have a case where
they are useful, we can set the flag for that case.

fixes fdo bug 27083

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

I missed rs4xx in 7f1e613daf0fdd0884316ab25a749db3c671329e

Fixes fdo bug 27219.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

RS4xx+ IGP chips use an internal gart, however,
some of them have the agp cap bits set in their pci
configs.  Make sure to clear the AGP flag as AGP will
not work with them.

Should fix fdo bug 27225

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

- rs780/880 were using the wrong bandwidth functions
- convert r1xx-r4xx to use the same pm sclk/mclk structs as
r5xx+
- move bandwidth setup to a common function

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Replace hardcoded numbers with rdev->num_crtc.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This fixes some issues with the last gfx init patch.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Make sure we have a crtc assigned to the encoder
before dereferencing it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>