This doesn't yet cover input, but the driver does get the display
working when the firmware is disabled from talking to our I2C lines.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-3-eric@anholt.net

SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

This patch is based on the code refactored by Tomasz Stanislawski
<t.stanislaws@samsung.com>, which was initially developed by:
Adam Hampson <ahampson@sta.samsung.com>
Erik Gilling <konkers@android.com>
Shankar Bandal <shankar.b@samsung.com>
Dharam Kumar <dharam.kr@samsung.com>

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org> [for dt bindings]
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507212431-5801-2-git-send-email-m.purski@samsung.com

Commit 669c9215 ("drm/atomic: Make async plane update checks work as
intended, v2.") assumed incorrectly that if only 1 plane is matched in
the loop, the variables will be set to that plane. In reality we reset
them to NULL every time a new plane was iterated. This behavior is
surprising, so fix this by making the for loops only assign the
variables on a match.

When we have not added all the planes/crtc/connector to the state, and
there's a few NULL ones after the last one we iterated, te assumption
is broken that the pointers will hold the values from the last loop
iteration, which holds true for all other for_each macros we're using.
Except of course the iterator pointer itself, but that one really is
entirely internal.

Cc: Dmitry Osipenko <digetx@gmail.com>
Fixes: 669c9215 ("drm/atomic: Make async plane update checks work as intended, v2.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-2-maarten.lankhorst@linux.intel.com


Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Dmitry Osipenko <digetx@gmail.com>

It can be seen in drm_atomic_get_private_obj_state() that
ptr will never be NULL, so skip the check for that case.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-1-maarten.lankhorst@linux.intel.com


Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

More drm-misc for 4.15:

Cross-subsystem Changes:
- bunch more simple outreachy patches (Meghana Madhyastha, Aishwarya
  Pant, Haneen Mohammed)
- Quite a pile of static checker/cocci/spelling fixups all over.
- Final driver patches+core cleanup of Noralf's new drm_gem_fb_create
  helper.

Core Changes:
- legacy DPMS docs improved
- add dri-devel m-l to fbdev to catch people who try to fix
  fbcon-on-kms bugs in the wrong place

Driver Changes:
- vc4: prep for dsi panels (Eric)

* tag 'drm-misc-next-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc: (34 commits)
  drm: fix typo in drm_gem_get_pages() comment
  MAINTAINERS: Add dri-devel as a mailing list for anything fbdev
  drm/virtio: Replace instances of reference/unreference with get/put
  drm/fb-cma-helper: Remove unused functions
  drm/tve200: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/sun4i: Use drm_gem_fb_create()
  drm/shmobile: Use drm_gem_fb_create()
  drm/rcar-du: Use drm_gem_fb_create()
  drm/mxsfb: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/meson: Use drm_gem_fb_create()
  drm/hisilicon/kirin: Use drm_gem_fb_create()
  drm/fsl-dcu: Use drm_gem_fb_create()
  drm/tinydrm: Use drm_gem_framebuffer_helper
  drm: of: always initialize panel in drm_of_find_panel_or_bridge()
  drm/tve200: Check for IS_ERR instead of NULL in probe
  drm/tve200: make two functions static
  drm/armada: Remove unused #include <drmP.h>
  drm/rockchip: Rely on the default best_encoder() behavior
  drm/vc4: Set up the DSI host at pdev probe time, not component bind.
  drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math.
  ...

I spent an embarrassingly long time looking for drm_gem_init_object()
before I realized I was actually looking for drm_gem_object_init().
Fix the typo to keep other poor developers from suffering the same
fate.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1507045091-6550-1-git-send-email-jcrouse@codeaurora.org

fbdev is in maintenance only, except that it's still used by drm
through the drm fbdev emulation, to be able to use fbcon. And people
might want to sometimes extend fbcon to enable new features for drm
drivers, e.g. Hans' panel orientation work.

The problem is that when those patches only touch fbdev code they'll
never show up on drm developer's radar, which means we end up with
designs that don't really fit whell into the full stack. That happened
a bit with the panel orientation work, where an fbcon patch made it
into 4.14, implementing a design that won't really work on the drm
side. Which means we now have to redo things, and on top coordinate 2
subsystem trees.

Since fbdev is super low-volume we can prevent this in the future by
simply adding the dri-devel mailing list to the fbdev subsystem.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908153528.17528-1-daniel.vetter@ffwll.ch

Just catching up with upstream.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Linux 4.14-rc3

Requested by Daniel for the tracing build fix in fixes.

Replace reference/unreference with get/put as it is consistent
with the kernel coding style. Done using the following semantic
patch by coccinelle.

@r@
expression e;
@@

-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);

Signed-off-by: Srishti Sharma <srishtishar@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1506679419-7130-1-git-send-email-srishtishar@gmail.com

Pull x86 fixes from Thomas Gleixner:
 "This contains the following fixes and improvements:

   - Avoid dereferencing an unprotected VMA pointer in the fault signal
     generation code

   - Fix inline asm call constraints for GCC 4.4

   - Use existing register variable to retrieve the stack pointer
     instead of forcing the compiler to create another indirect access
     which results in excessive extra 'mov %rsp, %<dst>' instructions

   - Disable branch profiling for the memory encryption code to prevent
     an early boot crash

   - Fix a sparse warning caused by casting the __user annotation in
     __get_user_asm_u64() away

   - Fix an off by one error in the loop termination of the error patch
     in the x86 sysfs init code

   - Add missing CPU IDs to various Intel specific drivers to enable the
     functionality on recent hardware

   - More (init) constification in the numachip code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Use register variable to get stack pointer value
  x86/mm: Disable branch profiling in mem_encrypt.c
  x86/asm: Fix inline asm call constraints for GCC 4.4
  perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
  perf/x86/intel/rapl: Add missing CPU IDs
  perf/x86/msr: Add missing CPU IDs
  perf/x86/intel/cstate: Add missing CPU IDs
  x86: Don't cast away the __user in __get_user_asm_u64()
  x86/sysfs: Fix off-by-one error in loop termination
  x86/mm: Fix fault error path using unsafe vma pointer
  x86/numachip: Add const and __initconst to numachip2_clockevent

Pull timer fixes from Thomas Gleixner:
 "This adds a new timer wheel function which is required for the
  conversion of the timer callback function from the 'unsigned long
  data' argument to 'struct timer_list *timer'. This conversion has two
  benefits:

   1) It makes struct timer_list smaller

   2) Many callers hand in a pointer to the timer or to the structure
      containing the timer, which happens via type casting both at setup
      and in the callback. This change gets rid of the typecasts.

  Once the conversion is complete, which is planned for 4.15, the old
  setup function and the intermediate typecast in the new setup function
  go away along with the data field in struct timer_list.

  Merging this now into mainline allows a smooth queueing of the actual
  conversion in the affected maintainer trees without creating
  dependencies"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  um/time: Fixup namespace collision
  timer: Prepare to change timer callback argument type

Pull smp/hotplug fixes from Thomas Gleixner:
 "This addresses the fallout of the new lockdep mechanism which covers
  completions in the CPU hotplug code.

  The lockdep splats are false positives, but there is no way to
  annotate that reliably. The solution is to split the completions for
  CPU up and down, which requires some reshuffling of the failure
  rollback handling as well"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/hotplug: Hotplug state fail injection
  smp/hotplug: Differentiate the AP completion between up and down
  smp/hotplug: Differentiate the AP-work lockdep class between up and down
  smp/hotplug: Callback vs state-machine consistency
  smp/hotplug: Rewrite AP state machine core
  smp/hotplug: Allow external multi-instance rollback
  smp/hotplug: Add state diagram

Pull scheduler fixes from Thomas Gleixner:
 "The scheduler pull request comes with the following updates:

   - Prevent a divide by zero issue by validating the input value of
     sysctl_sched_time_avg

   - Make task state printing consistent all over the place and have
     explicit state characters for IDLE and PARKED so they wont be
     displayed as 'D' state which confuses tools"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/sysctl: Check user input value of sysctl_sched_time_avg
  sched/debug: Add explicit TASK_PARKED printing
  sched/debug: Ignore TASK_IDLE for SysRq-W
  sched/debug: Add explicit TASK_IDLE printing
  sched/tracing: Use common task-state helpers
  sched/tracing: Fix trace_sched_switch task-state printing
  sched/debug: Remove unused variable
  sched/debug: Convert TASK_state to hex
  sched/debug: Implement consistent task-state printing

Pull perf fixes from Thomas Gleixner:

 - Prevent a division by zero in the perf aux buffer handling

 - Sync kernel headers with perf tool headers

 - Fix a build failure in the syscalltbl code

 - Make the debug messages of perf report --call-graph work correctly

 - Make sure that all required perf files are in the MANIFEST for
   container builds

 - Fix the atrr.exclude kernel handling so it respects the
   perf_event_paranoid and the user permissions

 - Make perf test on s390x work correctly

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Only update ->aux_wakeup in non-overwrite mode
  perf test: Fix vmlinux failure on s390x part 2
  perf test: Fix vmlinux failure on s390x
  perf tools: Fix syscalltbl build failure
  perf report: Fix debug messages with --call-graph option
  perf evsel: Fix attr.exclude_kernel setting for default cycles:p
  tools include: Sync kernel ABI headers with tooling headers
  perf tools: Get all of tools/{arch,include}/ in the MANIFEST

Pull  locking fixes from Thomas Gleixner:
 "Two fixes for locking:

   - Plug a hole the pi_stat->owner serialization which was changed
     recently and failed to fixup two usage sites.

   - Prevent reordering of the rwsem_has_spinner() check vs the
     decrement of rwsem count in up_write() which causes a missed
     wakeup"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem-xadd: Fix missed wakeup due to reordering of load
  futex: Fix pi_state->owner serialization

Pull irq fixes from Thomas Gleixner:

 - Add a missing NULL pointer check in free_irq()

 - Fix a memory leak/memory corruption in the generic irq chip

 - Add missing rcu annotations for radix tree access

 - Use ffs instead of fls when extracting data from a chip register in
   the MIPS GIC irq driver

 - Fix the unmasking of IPI interrupts in the MIPS GIC driver so they
   end up at the target CPU and not at CPU0

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irq/generic-chip: Don't replace domain's name
  irqdomain: Add __rcu annotations to radix tree accessors
  irqchip/mips-gic: Use effective affinity to unmask
  irqchip/mips-gic: Fix shifts to extract register fields
  genirq: Check __free_irq() return value for NULL

Pull objtool fixes from Thomas Gleixner:
 "Two small fixes for objtool:

   - Support frame pointer setup via 'lea (%rsp), %rbp' which was not
     yet supported and caused build warnings

   - Disable unreacahble warnings for GCC4.4 and older to avoid false
     positives caused by the compiler itself"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Support unoptimized frame pointer setup
  objtool: Skip unreachable warnings for GCC 4.4 and older

The cma drivers use the drm_gem_framebuffer_helper functions now,
so remove drm_fb_cma_destroy, drm_fb_cma_create_handle,
drm_fb_cma_create_with_funcs, drm_fb_cma_create and
drm_fb_cma_prepare_fb.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-11-git-send-email-noralf@tronnes.org

drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now,
use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-10-git-send-email-noralf@tronnes.org

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-9-git-send-email-noralf@tronnes.org

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-8-git-send-email-noralf@tronnes.org

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-7-git-send-email-noralf@tronnes.org

drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now,
use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-6-git-send-email-noralf@tronnes.org

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-5-git-send-email-noralf@tronnes.org

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-4-git-send-email-noralf@tronnes.org

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-3-git-send-email-noralf@tronnes.org

Use drm_gem_framebuffer_helper directly instead of the cma
library wrappers.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-2-git-send-email-noralf@tronnes.org

This fixes the 0-day build warning.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The callers expect "panel" to be initialized, but that isn't true if we
return -ENODEV.  It causes bugs like:

    drivers/gpu/drm/tve200/tve200_drv.c:83 tve200_modeset_init()
    error: uninitialized symbol 'panel'.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925103038.lvr5msjvekwczctn@mwanda

devm_ioremap_resource() returns error pointer, it never returns NULL on
error.

Fixes: 179c02fe ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925102520.a7spymwqqbsczzz2@mwanda

The functions tve200_display_disable and tve200_display_funcs are
local to the source and do not need to be in global scope, so make
them static.

Cleans up sparse warnings:
symbol 'tve200_display_disable' was not declared. Should it be static?
symbol 'tve200_display_funcs' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922160516.16283-1-colin.king@canonical.com

Pull mtd fixes from Boris Brezillon:

 - Fix partition alignment check in mtdcore.c

 - Fix a buffer overflow in the Atmel NAND driver

* tag 'mtd/fixes-for-4.14-rc3' of git://git.infradead.org/linux-mtd:
  mtd: nand: atmel: fix buffer overflow in atmel_pmecc_user
  mtd: Fix partition alignment check on multi-erasesize devices

Pull SCSI fixes from James Bottomley:
 "Eight mostly minor fixes for recently discovered issues in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ILLEGAL REQUEST + ASC==27 => target failure
  scsi: aacraid: Add a small delay after IOP reset
  scsi: scsi_transport_fc: Also check for NOTPRESENT in fc_remote_port_add()
  scsi: scsi_transport_fc: set scsi_target_id upon rescan
  scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
  scsi: aacraid: error: testing array offset 'bus' after use
  scsi: lpfc: Don't return internal MBXERR_ERROR code from probe function
  scsi: aacraid: Fix 2T+ drives on SmartIOC-2000

Pull x86 platform drivers fix from Darren Hart:
 "Newly discovered species of fujitsu laptops break some assumptions
  about ACPI device pairings.

  fujitsu-laptop: Don't oops when FUJ02E3 is not present"

* tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: fujitsu-laptop: Don't oops when FUJ02E3 is not presnt

Merge tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:
 "Four fixes for the as3645a LED flash controller and one update to
  MAINTAINERS"

* tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  MAINTAINERS: Add entry for MediaTek PMIC LED driver
  as3645a: Unregister indicator LED on device unbind
  as3645a: Use integer numbers for parsing LEDs
  dt: bindings: as3645a: Use LED number to refer to LEDs
  as3645a: Use ams,input-max-microamp as documented in DT bindings

Pull waitid fix from Al Viro:
 "Fix infoleak in waitid()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix infoleak in waitid(2)

Pull btrfs fixes from David Sterba:
 "We've collected a bunch of isolated fixes, for crashes, user-visible
  behaviour or missing bits from other subsystem cleanups from the past.

  The overall number is not small but I was not able to make it
  significantly smaller. Most of the patches are supposed to go to
  stable"

* 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: log csums for all modified extents
  Btrfs: fix unexpected result when dio reading corrupted blocks
  btrfs: Report error on removing qgroup if del_qgroup_item fails
  Btrfs: skip checksum when reading compressed data if some IO have failed
  Btrfs: fix kernel oops while reading compressed data
  Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block
  Btrfs: do not backup tree roots when fsync
  btrfs: remove BTRFS_FS_QUOTA_DISABLING flag
  btrfs: propagate error to btrfs_cmp_data_prepare caller
  btrfs: prevent to set invalid default subvolid
  Btrfs: send: fix error number for unknown inode types
  btrfs: fix NULL pointer dereference from free_reloc_roots()
  btrfs: finish ordered extent cleaning if no progress is found
  btrfs: clear ordered flag on cleaning up ordered extents
  Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO
  Btrfs: do not reset bio->bi_ops while writing bio
  Btrfs: use the new helper wbc_to_write_flags

Pull MD fixes from Shaohua Li:
 "A few fixes for MD. Mainly fix a problem introduced in 4.13, which we
  retry bio for some code paths but not all in some situations"

* tag 'md/4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid5: cap worker count
  dm-raid: fix a race condition in request handling
  md: fix a race condition for flush request handling
  md: separate request handling