Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Olof Johansson:

 - Reset controllers: Adding support for Microchip Sparx5 Switch.

 - Memory controllers: ARM Primecell PL35x SMC memory controller driver
   cleanups and improvements.

 - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.

 - Rockchip: RK3568 power domains support + DT binding updates,
   cleanups.

 - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
   including support for MSM8226, MDM9607, SM6125 and SC8180X.

 - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
   interfaces and communication (including bus model) between partitions
   both in Normal and Secure Worlds.

 - Tegra Memory controller changes, including major rework to deal with
   identity mappings at boot and integration with ARM SMMU pieces.

* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
  firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
  firmware: turris-mox-rwtm: show message about HWRNG registration
  firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
  firmware: turris-mox-rwtm: report failures better
  firmware: turris-mox-rwtm: fix reply status decoding function
  soc: imx: gpcv2: add support for i.MX8MN power domains
  dt-bindings: add defines for i.MX8MN power domains
  firmware: tegra: bpmp: Fix Tegra234-only builds
  iommu/arm-smmu: Use Tegra implementation on Tegra186
  iommu/arm-smmu: tegra: Implement SID override programming
  iommu/arm-smmu: tegra: Detect number of instances at runtime
  dt-bindings: arm-smmu: Add Tegra186 compatible string
  firmware: qcom_scm: Add MDM9607 compatible
  soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
  soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
  memory: emif: remove unused frequency and voltage notifiers
  memory: fsl_ifc: fix leak of private memory on probe failure
  memory: fsl_ifc: fix leak of IO mapping on probe failure
  ...

Documentation/devicetree/bindings/arm/rockchip/pmu.txt

-Rockchip power-management-unit:
--------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : = "rockchip,rk3066-pmu";
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu";
-		reg = <0x20004000 0x100>;
-	};

Documentation/devicetree/bindings/arm/rockchip/pmu.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/rockchip/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Management Unit (PMU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PMU is used to turn on and off different power domains of the SoCs.
+  This includes the power to the CPU cores.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,px30-pmu
+          - rockchip,rk3066-pmu
+          - rockchip,rk3288-pmu
+          - rockchip,rk3399-pmu
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-pmu
+          - rockchip,rk3066-pmu
+          - rockchip,rk3288-pmu
+          - rockchip,rk3399-pmu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    pmu@20004000 {
+      compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
+      reg = <0x20004000 0x100>;
+    };

Documentation/devicetree/bindings/firmware/qcom,scm.txt

@@ -12,6 +12,7 @@ Required properties:
  * "qcom,scm-ipq4019"
  * "qcom,scm-ipq806x"
  * "qcom,scm-ipq8074"
+ * "qcom,scm-mdm9607"
  * "qcom,scm-msm8660"
  * "qcom,scm-msm8916"
  * "qcom,scm-msm8960"

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

@@ -54,8 +54,14 @@ properties:
           - const: arm,mmu-500
       - description: NVIDIA SoCs that program two ARM MMU-500s identically
         items:
+      - description: NVIDIA SoCs that require memory controller interaction
+          and may program multiple ARM MMU-500s identically with the memory
+          controller interleaving translations between multiple instances
+          for improved performance.
+        items:
           - enum:
-              - nvidia,tegra194-smmu
+              - const: nvidia,tegra194-smmu
+              - const: nvidia,tegra186-smmu
           - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500
@@ -165,10 +171,11 @@ allOf:
           contains:
             enum:
               - nvidia,tegra194-smmu
+              - nvidia,tegra186-smmu
     then:
       properties:
         reg:
-          minItems: 2
+          minItems: 1
           maxItems: 2
     else:
       properties:

Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml

@@ -30,9 +30,6 @@ properties:
   "#clock-cells":
     const: 0
 
-  "#phy-cells":
-    const: 0
-
   clocks:
     maxItems: 1
 
@@ -120,7 +117,6 @@ required:
   - reg
   - clock-output-names
   - "#clock-cells"
-  - "#phy-cells"
   - host-port
   - otg-port
 
@@ -131,26 +127,25 @@ examples:
     #include <dt-bindings/clock/rk3399-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    u2phy0: usb2-phy@e450 {
+    u2phy0: usb2phy@e450 {
       compatible = "rockchip,rk3399-usb2phy";
       reg = <0xe450 0x10>;
       clocks = <&cru SCLK_USB2PHY0_REF>;
       clock-names = "phyclk";
       clock-output-names = "clk_usbphy0_480m";
       #clock-cells = <0>;
-      #phy-cells = <0>;
 
       u2phy0_host: host-port {
-        #phy-cells = <0>;
         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
         interrupt-names = "linestate";
+        #phy-cells = <0>;
       };
 
       u2phy0_otg: otg-port {
-        #phy-cells = <0>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
         interrupt-names = "otg-bvalid", "otg-id", "linestate";
+        #phy-cells = <0>;
       };
     };

Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml

@@ -25,7 +25,9 @@ properties:
   compatible:
     enum:
       - fsl,imx7d-gpc
+      - fsl,imx8mn-gpc
       - fsl,imx8mq-gpc
+      - fsl,imx8mm-gpc
 
   reg:
     maxItems: 1
@@ -54,6 +56,7 @@ properties:
               Power domain index. Valid values are defined in
               include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
               include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+              include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
             maxItems: 1
 
           clocks:

Documentation/devicetree/bindings/power/qcom,rpmpd.yaml

@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,mdm9607-rpmpd
       - qcom,msm8916-rpmpd
       - qcom,msm8939-rpmpd
       - qcom,msm8976-rpmpd
@@ -26,6 +27,7 @@ properties:
       - qcom,sdm660-rpmpd
       - qcom,sc7180-rpmhpd
       - qcom,sc7280-rpmhpd
+      - qcom,sc8180x-rpmhpd
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
       - qcom,sm8150-rpmhpd

Documentation/devicetree/bindings/power/rockchip,power-controller.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  Rockchip processors include support for multiple power domains
+  which can be powered up/down by software based on different
+  application scenarios to save power.
+
+  Power domains contained within power-controller node are
+  generic power domain providers documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml.
+
+  IP cores belonging to a power domain should contain a
+  "power-domains" property that is a phandle for the
+  power domain node representing the domain.
+
+properties:
+  $nodename:
+    const: power-controller
+
+  compatible:
+    enum:
+      - rockchip,px30-power-controller
+      - rockchip,rk3036-power-controller
+      - rockchip,rk3066-power-controller
+      - rockchip,rk3128-power-controller
+      - rockchip,rk3188-power-controller
+      - rockchip,rk3228-power-controller
+      - rockchip,rk3288-power-controller
+      - rockchip,rk3328-power-controller
+      - rockchip,rk3366-power-controller
+      - rockchip,rk3368-power-controller
+      - rockchip,rk3399-power-controller
+      - rockchip,rk3568-power-controller
+
+  "#power-domain-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^power-domain@[0-9a-f]+$":
+
+    $ref: "#/$defs/pd-node"
+
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+
+        $ref: "#/$defs/pd-node"
+
+        unevaluatedProperties: false
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+
+            $ref: "#/$defs/pd-node"
+
+            unevaluatedProperties: false
+
+            properties:
+              "#power-domain-cells":
+                const: 0
+
+$defs:
+  pd-node:
+    type: object
+    description: |
+      Represents the power domains within the power controller node.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          Power domain index. Valid values are defined in
+          "include/dt-bindings/power/px30-power.h"
+          "include/dt-bindings/power/rk3036-power.h"
+          "include/dt-bindings/power/rk3066-power.h"
+          "include/dt-bindings/power/rk3128-power.h"
+          "include/dt-bindings/power/rk3188-power.h"
+          "include/dt-bindings/power/rk3228-power.h"
+          "include/dt-bindings/power/rk3288-power.h"
+          "include/dt-bindings/power/rk3328-power.h"
+          "include/dt-bindings/power/rk3366-power.h"
+          "include/dt-bindings/power/rk3368-power.h"
+          "include/dt-bindings/power/rk3399-power.h"
+          "include/dt-bindings/power/rk3568-power.h"
+
+      clocks:
+        minItems: 1
+        maxItems: 30
+        description: |
+          A number of phandles to clocks that need to be enabled
+          while power domain switches state.
+
+      pm_qos:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description: |
+          A number of phandles to qos blocks which need to be saved and restored
+          while power domain switches state.
+
+      "#power-domain-cells":
+        enum: [0, 1]
+        description:
+          Must be 0 for nodes representing a single PM domain and 1 for nodes
+          providing multiple PM domains.
+
+    required:
+      - reg
+      - "#power-domain-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qos_hdcp: qos@ffa90000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa90000 0x0 0x20>;
+        };
+
+        qos_iep: qos@ffa98000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa98000 0x0 0x20>;
+        };
+
+        qos_rga_r: qos@ffab0000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab0000 0x0 0x20>;
+        };
+
+        qos_rga_w: qos@ffab0080 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab0080 0x0 0x20>;
+        };
+
+        qos_video_m0: qos@ffab8000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab8000 0x0 0x20>;
+        };
+
+        qos_video_m1_r: qos@ffac0000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffac0000 0x0 0x20>;
+        };
+
+        qos_video_m1_w: qos@ffac0080 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffac0080 0x0 0x20>;
+        };
+
+        power-management@ff310000 {
+            compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+            reg = <0x0 0xff310000 0x0 0x1000>;
+
+            power-controller {
+                compatible = "rockchip,rk3399-power-controller";
+                #power-domain-cells = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* These power domains are grouped by VD_CENTER */
+                power-domain@RK3399_PD_IEP {
+                    reg = <RK3399_PD_IEP>;
+                    clocks = <&cru ACLK_IEP>,
+                             <&cru HCLK_IEP>;
+                    pm_qos = <&qos_iep>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_RGA {
+                    reg = <RK3399_PD_RGA>;
+                    clocks = <&cru ACLK_RGA>,
+                             <&cru HCLK_RGA>;
+                    pm_qos = <&qos_rga_r>,
+                             <&qos_rga_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VCODEC {
+                    reg = <RK3399_PD_VCODEC>;
+                    clocks = <&cru ACLK_VCODEC>,
+                             <&cru HCLK_VCODEC>;
+                    pm_qos = <&qos_video_m0>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VDU {
+                    reg = <RK3399_PD_VDU>;
+                    clocks = <&cru ACLK_VDU>,
+                             <&cru HCLK_VDU>;
+                    pm_qos = <&qos_video_m1_r>,
+                             <&qos_video_m1_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VIO {
+                    reg = <RK3399_PD_VIO>;
+                    #power-domain-cells = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    power-domain@RK3399_PD_HDCP {
+                        reg = <RK3399_PD_HDCP>;
+                        clocks = <&cru ACLK_HDCP>,
+                                 <&cru HCLK_HDCP>,
+                                 <&cru PCLK_HDCP>;
+                        pm_qos = <&qos_hdcp>;
+                        #power-domain-cells = <0>;
+                    };
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/reset/microchip,rst.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Microchip Sparx5 Switch provides reset control and implements the following
+  functions
+    - One Time Switch Core Reset (Soft Reset)
+
+properties:
+  $nodename:
+    pattern: "^reset-controller@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-switch-reset
+
+  reg:
+    items:
+      - description: global control block registers
+
+  reg-names:
+    items:
+      - const: gcb
+
+  "#reset-cells":
+    const: 1
+
+  cpu-syscon:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: syscon used to access CPU reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+  - cpu-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11010008 {
+        compatible = "microchip,sparx5-switch-reset";
+        reg = <0x11010008 0x4>;
+        reg-names = "gcb";
+        #reset-cells = <1>;
+        cpu-syscon = <&cpu_ctrl>;
+    };
+

Documentation/devicetree/bindings/soc/mediatek/pwrap.txt

@@ -27,6 +27,7 @@ Required properties in pwrap device node.
 	"mediatek,mt8135-pwrap" for MT8135 SoCs
 	"mediatek,mt8173-pwrap" for MT8173 SoCs
 	"mediatek,mt8183-pwrap" for MT8183 SoCs
+	"mediatek,mt8195-pwrap" for MT8195 SoCs
 	"mediatek,mt8516-pwrap" for MT8516 SoCs
 - interrupts: IRQ for pwrap in SOC
 - reg-names: Must include the following entries:

Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml

@@ -32,12 +32,14 @@ properties:
     enum:
       - qcom,rpm-apq8084
       - qcom,rpm-ipq6018
+      - qcom,rpm-msm8226
       - qcom,rpm-msm8916
       - qcom,rpm-msm8974
       - qcom,rpm-msm8976
       - qcom,rpm-msm8996
       - qcom,rpm-msm8998
       - qcom,rpm-sdm660
+      - qcom,rpm-sm6125
       - qcom,rpm-qcs404
 
   qcom,smd-channels:

Documentation/devicetree/bindings/soc/rockchip/grf.txt

-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
-   - "rockchip,px30-grf", "syscon": for px30
-   - "rockchip,rk3036-grf", "syscon": for rk3036
-   - "rockchip,rk3066-grf", "syscon": for rk3066
-   - "rockchip,rk3188-grf", "syscon": for rk3188
-   - "rockchip,rk3228-grf", "syscon": for rk3228
-   - "rockchip,rk3288-grf", "syscon": for rk3288
-   - "rockchip,rk3308-grf", "syscon": for rk3308
-   - "rockchip,rk3328-grf", "syscon": for rk3328
-   - "rockchip,rk3368-grf", "syscon": for rk3368
-   - "rockchip,rk3399-grf", "syscon": for rk3399
-   - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
-   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
-   - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
-   - "rockchip,px30-pmugrf", "syscon": for px30
-   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
-   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
-   - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
-   - "rockchip,px30-usb2phy-grf", "syscon": for px30
-   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
-   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
-	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
-		reg = <0x0 0xff320000 0x0 0x1000>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
-		reg = <0x0 0xff770000 0x0 0x10000>;
-	};

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3288-sgrf
+              - rockchip,rv1108-pmugrf
+              - rockchip,rv1108-usbgrf
+          - const: syscon
+      - items:
+          - enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3036-grf
+              - rockchip,rk3066-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3308-core-grf
+              - rockchip,rk3308-detect-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3308-usb2phy-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-grf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rv1108-grf
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-grf
+
+    then:
+      properties:
+        lvds:
+          description:
+            Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-grf
+
+    then:
+      properties:
+        edp-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3066-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3288-grf
+
+    then:
+      properties:
+        usbphy:
+          type: object
+
+          $ref: "/schemas/phy/rockchip-usb-phy.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-grf
+
+    then:
+      properties:
+        gpio:
+          type: object
+
+          $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+
+          unevaluatedProperties: false
+
+        power-controller:
+          type: object
+
+          $ref: "/schemas/power/rockchip,power-controller.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-grf
+
+    then:
+      properties:
+        mipi-dphy-rx0:
+          type: object
+
+          $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+
+          unevaluatedProperties: false
+
+        pcie-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+      patternProperties:
+        "phy@[0-9a-f]+$":
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,rk3036-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3368-pmugrf
+
+    then:
+      properties:
+        reboot-mode:
+          type: object
+
+          $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3308-usb2phy-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3399-grf
+              - rockchip,rv1108-grf
+
+    then:
+      required:
+        - "#address-cells"
+        - "#size-cells"
+
+      patternProperties:
+        "usb2phy@[0-9a-f]+$":
+          type: object
+
+          $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,px30-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3368-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3399-grf
+
+    then:
+      properties:
+        io-domains:
+          description:
+            Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    grf: syscon@ff770000 {
+      compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+      reg = <0xff770000 0x10000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+      };
+
+      u2phy0: usb2phy@e450 {
+        compatible = "rockchip,rk3399-usb2phy";
+        reg = <0xe450 0x10>;
+        clocks = <&cru SCLK_USB2PHY0_REF>;
+        clock-names = "phyclk";
+        #clock-cells = <0>;
+        clock-output-names = "clk_usbphy0_480m";
+
+        u2phy0_host: host-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "linestate";
+         };
+
+        u2phy0_otg: otg-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "otg-bvalid", "otg-id",
+                            "linestate";
+        };
+      };
+    };

Documentation/devicetree/bindings/soc/rockchip/power_domain.txt

-* Rockchip Power Domains
-
-Rockchip processors include support for multiple power domains which can be
-powered up/down by software based on different application scenes to save power.
-
-Required properties for power domain controller:
-- compatible: Should be one of the following.
-	"rockchip,px30-power-controller" - for PX30 SoCs.
-	"rockchip,rk3036-power-controller" - for RK3036 SoCs.
-	"rockchip,rk3066-power-controller" - for RK3066 SoCs.
-	"rockchip,rk3128-power-controller" - for RK3128 SoCs.
-	"rockchip,rk3188-power-controller" - for RK3188 SoCs.
-	"rockchip,rk3228-power-controller" - for RK3228 SoCs.
-	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
-	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
-	"rockchip,rk3366-power-controller" - for RK3366 SoCs.
-	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
-	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
-- #power-domain-cells: Number of cells in a power-domain specifier.
-	Should be 1 for multiple PM domains.
-- #address-cells: Should be 1.
-- #size-cells: Should be 0.
-
-Required properties for power domain sub nodes:
-- reg: index of the power domain, should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
-	"include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
-	"include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
-	"include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
-- clocks (optional): phandles to clocks which need to be enabled while power domain
-	switches state.
-- pm_qos (optional): phandles to qos blocks which need to be saved and restored
-	while power domain switches state.
-
-Qos Example:
-
-	qos_gpu: qos_gpu@ffaf0000 {
-		compatible ="syscon";
-		reg = <0x0 0xffaf0000 0x0 0x20>;
-	};
-
-Example:
-
-	power: power-controller {
-		compatible = "rockchip,rk3288-power-controller";
-		#power-domain-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pd_gpu {
-			reg = <RK3288_PD_GPU>;
-			clocks = <&cru ACLK_GPU>;
-			pm_qos = <&qos_gpu>;
-		};
-	};
-
-	 power: power-controller {
-                compatible = "rockchip,rk3368-power-controller";
-                #power-domain-cells = <1>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                pd_gpu_1 {
-                        reg = <RK3368_PD_GPU_1>;
-                        clocks = <&cru ACLK_GPU_CFG>;
-                };
-        };
-
-Example 2:
-		power: power-controller {
-			compatible = "rockchip,rk3399-power-controller";
-			#power-domain-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pd_vio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <RK3399_PD_VIO>;
-
-				pd_vo {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <RK3399_PD_VO>;
-
-					pd_vopb {
-						reg = <RK3399_PD_VOPB>;
-					};
-
-					pd_vopl {
-						reg = <RK3399_PD_VOPL>;
-					};
-				};
-			};
-		};
-
-Node of a device using power domains must have a power-domains property,
-containing a phandle to the power device node and an index specifying which
-power domain to use.
-The index should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for px30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
-
-Example of the node using power domain:
-
-	node {
-		/* ... */
-		power-domains = <&power RK3288_PD_GPU>;
-		/* ... */
-	};
-
-	node {
-                /* ... */
-                power-domains = <&power RK3368_PD_GPU_1>;
-                /* ... */
-        };
-
-	node {
-		/* ... */
-		power-domains = <&power RK3399_PD_VOPB>;
-		/* ... */
-	};

MAINTAINERS

@@ -7182,6 +7182,13 @@ F:	include/linux/firewire.h
 F:	include/uapi/linux/firewire*.h
 F:	tools/firewire/
+FIRMWARE FRAMEWORK FOR ARMV8-A
+M:	Sudeep Holla <sudeep.holla@arm.com>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	drivers/firmware/arm_ffa/
+F:	include/linux/arm_ffa.h
+
 FIRMWARE LOADER (request_firmware)
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
@@ -11947,6 +11954,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
 F:	Documentation/devicetree/bindings/memory-controllers/
 F:	drivers/memory/
 F:	include/dt-bindings/memory/
+F:	include/memory/
 MEMORY FREQUENCY SCALING DRIVERS FOR NVIDIA TEGRA
 M:	Dmitry Osipenko <digetx@gmail.com>

drivers/bus/qcom-ebi2.c

@@ -102,8 +102,8 @@
 /**
  * struct cs_data - struct with info on a chipselect setting
  * @enable_mask: mask to enable the chipselect in the EBI2 config
- * @slow_cfg0: offset to XMEMC slow CS config
- * @fast_cfg1: offset to XMEMC fast CS config
+ * @slow_cfg: offset to XMEMC slow CS config
+ * @fast_cfg: offset to XMEMC fast CS config
  */
 struct cs_data {
 	u32 enable_mask;

drivers/firmware/Kconfig

@@ -9,7 +9,7 @@ menu "Firmware Drivers"
 config ARM_SCMI_PROTOCOL
 	tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
 	depends on ARM || ARM64 || COMPILE_TEST
-	depends on MAILBOX
+	depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
 	help
 	  ARM System Control and Management Interface (SCMI) protocol is a
 	  set of operating system-independent software interfaces that are
@@ -296,6 +296,7 @@ config TURRIS_MOX_RWTM
 	  other manufacturing data and also utilize the Entropy Bit Generator
 	  for hardware random number generation.
 
+source "drivers/firmware/arm_ffa/Kconfig"
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"

drivers/firmware/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
 obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
 obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
 
+obj-y				+= arm_ffa/
 obj-y				+= arm_scmi/
 obj-y				+= broadcom/
 obj-y				+= meson/

drivers/firmware/arm_ffa/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+config ARM_FFA_TRANSPORT
+	tristate "Arm Firmware Framework for Armv8-A"
+	depends on OF
+	depends on ARM64
+	default n
+	help
+	  This Firmware Framework(FF) for Arm A-profile processors describes
+	  interfaces that standardize communication between the various
+	  software images which includes communication between images in
+	  the Secure world and Normal world. It also leverages the
+	  virtualization extension to isolate software images provided
+	  by an ecosystem of vendors from each other.
+
+	  This driver provides interface for all the client drivers making
+	  use of the features offered by ARM FF-A.
+
+config ARM_FFA_SMCCC
+	bool
+	default ARM_FFA_TRANSPORT
+	depends on ARM64 && HAVE_ARM_SMCCC_DISCOVERY

drivers/firmware/arm_ffa/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+ffa-bus-y = bus.o
+ffa-driver-y = driver.o
+ffa-transport-$(CONFIG_ARM_FFA_SMCCC) += smccc.o
+ffa-module-objs := $(ffa-bus-y) $(ffa-driver-y) $(ffa-transport-y)
+obj-$(CONFIG_ARM_FFA_TRANSPORT) = ffa-module.o